Welcome to GetFPV My Account My Wishlist Log In

Matek F722 Mini SE 20x20 Flight Controller

More Views

Matek F722 Mini SE 20x20 Flight Controller
The Matek F722-Mini SE Flight Controller is an F7 FC with built-in Baro, BEC 5V/2A, MPU6000 (SPI), AT7456E (SPI), and DJI OSD and supports MATEKF722mini INAV and many other cool features!
In Stock
$39.99
OR
Description

The Matek F722-Mini SE Flight Controller is an F7 FC with built-in Baro, BEC 5V/2A, MPU6000 (SPI), AT7456E (SPI), and DJI OSD and supports MATEKF722mini INAV and many other cool features!

Specifications

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 (SPI)
  • OSD: AT7456E (SPI)
  • Baro: Infineon DPS310 (I2C)
  • Blackbox: 32M-byte Flash memory (SPI)
  • 5x Uarts (1,2,3,4,6) with build-in inversion
  • 1x Softserial supported
  • 8x Dshot/Proshot/Oneshot outputs
  • 1x I2C
  • 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1)
  • Dual Camera image switchable via AUX (modes tab-user2)
  • Convertible 20mm to 30.5mm mounting
  • Camera control: Yes
  • Smart audio & Tramp VTX protocol: Yes
  • DJI OSD: Yes (any spare Uart Tx & Rx)
  • WS2812 Led Strip: Yes
  • Beeper: Yes
  • RSSI: Yes
  • Additional ADC for INAV analog airspeed

Power

  • Input: 6~36V (2~8S LiPo)
  • BEC: 5V 2A
  • LDO 3.3V: Max.200mA
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • No Current Sensor built-in supports external current sensor of PDB/4in1

Firmware

  • INAV target: MATEKF722mini
  • BetaFlight unified target: MATEKF722mini(MTKS)
  • BetaFlight legacy target: MATEKF722SE

Physical

  • Mounting
  • 20 x 20mm/Φ3mm with Silicon Grommets
  • 20 x 20mm/Φ2mm with Silicon & Brass Grommets
  • 30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicone Grommets
  • Dimensions: 28 x 28 mm
  • Weight: 5g

Diagram

Includes

  • 1 x FC F722 Mini SE
  • 1 x 20mm to 30.5mm conversion plate
  • 6 x Silicon grommets M4 to M3
  • 6 x Brass grommets M3 to M2
  • 1 x SH1.0_8pin cable 5cm
  • 2 x SH1.0_8pin connectors
Additional Information
SKU 14242
Manufacturer Matek Systems
UPC (GTIN) 789862853114
Reviews