MATEKSYS F405-SE Flight Controller
MATEKSYS F405-SE Flight Controller
About this product
The Matek's line of F4 flight controllers brings a host of new possibilities to your fixed wing or multirotor. This F4 FC features STM32F405RET6, MPU6000, DPS310, OSD, SD slot, 6x UARTs, 2x I2C, 9x PWM outputs.
Specifications
- MCU: 168MHz STM32F405RET6
- IMU: MPU6000 (SPI)
- Baro: DPS310 (I2C)
- OSD: AT7456E (SPI)
- Blackbox: MicroSD slot (SPI)
- VCP & 6x Uarts, 1x Softserial_Tx supported
- 9x PWM outputs (7x Dshot compatible with BF/INAV)
- 2x I2C
- 3x ADC (voltage, current, RSSI)
- 4x RX6 pad(one per corner) for BLheli32 ESC telemetry
- 4x individual ESC power/signal pads
- 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- Built-in inverter on UART2-RX for SBUS input
- PPM/UART Shared: UART2-RX
- Vbat filtered output power for VTX
- Camera control: Yes
- Smart audio & Tramp VTX protocol: Yes
- DJI FPV OSD protocol: Yes
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: Yes
PDB
- Input: 6~36V (2~8S LiPo) w/TVS protection
- PDB: 4x35A (Max.4x46A)
- BEC: 5V 2A cont. (Max.3A)
- LDO 3.3V: Max.200mA
- Current Sensor 184A (Scale 179 in INAV/BF)
- Battery Voltage Sensor: 1K:10K
Firmware
- INAV: MATEKF405SE
- BetaFlight: MATEKF405SE
- ArduPilot: MATEKF405-WING
Physical
- Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
- Dimensions: 36 x 46 mm
- Weight: 10g
Includes
- 1 x F405-SE
- 6 x silicon grommets M4 to M3
- 1 x FR4 PCB Plate 36*36*1mm
- 1 x Rubycon ZLH 35V/470uF (Low ESR)
FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
More Information
SKU | 14240 |
---|---|
UPC (GTIN) | 751313218537 |
Manufacturer | Matek Systems |
Mounting Pattern | 16x16mm |
NDAA Compliant | No |
Item Returns | This item can be returned |