The Lumenier QAV-S 2 JohnnyFPV SE 5" 6S DIY Kit is a drone frame kit designed for cinematic FPV Freestyle flying! This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold for convenient transportation with just two screws. The frame's aluminum FPV camera protection ensures superior camera support, with customizable carbon plates compatible with various cameras, including vibration isolation options optimized for image stabilization. With 6mm thick arms, the QAV-S 2 5" frame achieves an unparalleled balance of durability and weight at 133g (frame only).

Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The mounting system adds versatility, allowing direct mounting of both the O3 air unit & Walksnail Avatar HD Pro, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame – where innovation meets performance!

Also Available: Lumenier QAV-S 2 6S 7" JohnnyFPV DIY Kit!

Note: This is a complete DIY build kit that requires assembly. A receiver is not included and must be purchased separately.

VIDEO: Luemnier QAV-S 2 JohnnyFPV SE Frame Kit

• DIY kit contains most components to build your own drone
• Made in Collaboration with expert FPV pilot JohnnyFPV
• Frame made of High-Quality Lumenier components
• Adjustable Aluminum XT60 and Accessory Mount
• Backward-compatible mounting patterns
• Aluminum FPV Camera Protection
• Balanced Durability and Weight
• Injection-Molded GoPro Mount
• X-Lock Arm Retention

• Stack: Axisflying Argus Pro F7 FC + Axisflying Argus Pro 55A 3-6S BLHeli_32 ESC + wire cover (No Heat Sink)
• Propeller: HQProp Juicy J40 5.1x4x3 Propeller (Set of 4) - Grey
• Motor: Lumenier 2307 JohnnyFPV V3 Pro Cinematic Motor
• Frame: Lumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit

IMPORTANT NOTES

• The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame. 
•  If you select an ELRS receiver, you will need to pair it with an ELRS controller. The same applies to the TBS options.

If you choose the No FPV System option, here are some recommended products that are compatbile with the DIY Kit:

If you choose the DJI O3 Air Unit option, here are some recommended products that are compatible with the DIY Kit:

If you choose the Walksnail Avatar HD Pro Kit option, here are some recommended products that are compatible with the DIY Kit:

• Lumenier QAV-S 2 JohnnyFPV Manual

• 1x Axisflying Argus Pro F7 FC + Axisflying Argus Pro 55A 3-6S BLHeli_32 ESC + wire cover (No Heat Sink)
• 1x Lumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit
• 2x HQProp Juicy J40 5.1x4x3 Propeller (Set of 4)
• 1x Immortal T Antenna - Regular Length
• 4x Lumenier Johnny V3 2307 1750kv
• 1x Lumenier Zipper Case
• 1x Hardware Kit

Note: This version of the DIY kit does not include a VTX system. A VTX system must be purchased separately.

• 1x Axisflying Argus Pro F7 FC + Axisflying Argus Pro 55A 3-6S BLHeli_32 ESC + wire cover (No Heat Sink)
• 1x Lumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit
• 2x HQProp Juicy J40 5.1x4x3 Propeller (Set of 4)
• 4x Lumenier JohnnyFPV Pro V3 2307 1750kv
• 1x Immortal T Antenna - Regular Length
• 1x Lumenier Zipper Case
• 1x DJI O3 Air Unit
• 1x Hardware Kit

• 1x Axisflying Argus Pro F7 FC + Axisflying Argus Pro 55A 3-6S BLHeli_32 ESC + wire cover (No Heat Sink)
• 1x Lumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit
• 2x HQProp Juicy J40 5.1x4x3 Propeller (Set of 4)
• 4x Lumenier JohnnyFPV Pro V3 2307 1750kv
• 1x Immortal T Antenna - Regular Length
• 1x Walksnail Avatar HD Pro Kit
• 1x Lumenier Zipper Case
• 1x Hardware Kit

VIDEO: YOU CAN BUILD THIS LUMENIER QAV-S 2 JOHNNYFPV SE 5” FPV DRONE ????️

VIDEO: LUMENIER QAV-S 2 JOHNNYFPV SE 5” FRAME - BEST CINEMATIC DRONE PLATFORM FOR 2024?