Welcome to GetFPV My Account My Wishlist Log In

Lumenier 3-Way Multi-Camera Video Switcher Board

More Views

Lumenier 3-Way Multi-Camera Video Switcher Board
The Lumenier 3-Way Multi-Camera Video Switcher Board allows you to connect up to 3 video cameras and output 1 at a time via a PWM signal.
In Stock
$10.99
OR
Description

The Lumenier 3-Way Multi-Camera Video Switcher Board allows you to connect up to 3 video cameras and output 1 at a time via a PWM signal. You can switch between flight camera, back view camera and camera facing down or use switch to see view from camera that takes pictures as an example.

Features

  • 3 video inputs, 1 video output
  • Tiny in size, and removeable lower portion offers even smaller footprint
  • 25x17x4mm size (16x17x4mm after removing lower portion)
  • Only weighs 2g
  • Connect with pin headers with servo connectors, or simply direct solder to pads
  • Regular servo channel PWM control from RC receiver
  • Video input and output power pins interconnected
  • Additional output to power video devices
  • Operating voltage 5V – 26V (Note: power input voltage will be the same as power output to your cameras)
  • On-board LED to display operating functions

Connecting and Controlling

The Lumenier 3-Way Multi-Camera Video Switcher Board is easy to connect and control. Each channel is activated by simply sending a PWM signal value matching to each camera source.

  • CH1: PWM value of 1250 or below
  • CH2: PWM value between 1350-1750 (recommend 1500)
  • CH3: PWM value of 1750 and above

Video Power

The middle row of pins are interconnected to share same power between video cameras and video transmitter connected. You can power all devices either by feeding voltage to one of video devices connected or by soldering additional leads to battery input and connect battery. The entire voltage rail is shared, so whatever power is provided is shared across all connected devices.

Optional - Removing bottom 3rd of board

The Lumenier Video Switcher Board gives you 2 options on how to configure your connections. The default way is to solder on the included pin headers to allow for direct 3 position servo cable. Alternatively you can cut the lower portion of the PCB off along the pre-drilled holes to remove the pin header holes. Then you can direct solder to the pads in the upper portion of the board giving you tiny footprint of just 16x17mm.

Includes

  • 1x - Lumenier 3-Way Multi-Camera Video Switcher Board
  • 1x - Set of right angle 3 position pin headers
Additional Information
SKU 11651
Manufacturer Lumenier
UPC (GTIN) 082652058912
Reviews