Eagle 1.3 GHz 500mW-1000mW FPV Transmitter - US Version
Eagle 1.3 GHz 500mW-1000mW FPV Transmitter - US Version
Out of Stock
About this product
The new T1013 Eagle long-range transmitter has been completely redesigned and tailored for FPV with a handful of improvements, such as a new switching regulator, ceramic high-efficiency low profile heatsinks, high-quality audio channel, runs 50% cooler than its previous model, lower profile, 10 grams lighter and overall better performance.
It's a powerhouse, providing 500/1000 milliwatts of pre RF output. It is the best transmitter for long range applications. Even with all that power, it weighs only around 0.8oz (25grams). With all this, and the right setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As with many of our transmitters, the Eagle has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it.
Features
- 500/1000mW RF output power
- (2) User-selectable US channels (1258 MHz and 1280 MHz)
- 1.3 GHz frequency band
- Works with any camera PAL or NTSC
- Digital Phase-Lock-Loop circuit no drifting problem
- Works with any of our receivers
- Audio and Video cable with RCA adapter
- Highly integrated circuit
- High reliability/linearity/AIGaAs/GaAs FET amplifier module
- Uses digital phase-lock-loop circuit without temperature drifting problem
- Weight: 30g (transmitter only)
Specifications:
- Output power 50-ohm load CH1 Vcc = 12V: 30dBm (1000mW)
- Nominal output impedance: 50 ohms
- Operating voltage: Vcc, 10.5V (minimum), 12V (typical), 13V (maximum)
- Supply current Vcc = 12V: 350mA (typical), 400mA (maximum)
- Video input voltage 75-ohm impedance: 1Vp-p
- Audio input voltage 10k ohm impedance: 1Vp-p
- Subcarrier frequency: 5.5MHz
- Operation temperature: -10 to 40 degrees Celsius
- Storage temperature: -40 to 80 degrees Celsius
- Operating humidity: 20 to 80%
- Storage humidity: 10 to 80%
- Dimensions and weight: 50 x 26 x 11mm, 0.93oz (26g) (without antenna)
- Standard shipping package:
- 1.3 GHz 500/1000mW AV transmitter (Lawmate's replacement)
- SMA type dipole antenna x 1
- Jack connector to RCA AV input and power input cable x 1
- Channel 1: 1200 MHz (Not available for US customers)
- Channel 2: 1220 MHz (Not available for US customers)
- Channel 3: 1240 MHz (Not available for US customers)
- Channel 4: 1258 MHz (US Channel)
- Channel 5: 1280 MHz (US Channel)
- Channel 6: 1300 MHz (Not available for US customers)
- Channel 7: 1320 MHz (Not available for US customers)
- Channel 8: 1340 MHz (Not available for US customers)
Includes
- 1x Eagle 1.3 GHz 500/1000mW AV transmitter
- 1x SMA type dipole antenna x 1
- 1x Jack connector to RCA AV input and power input cable x 1
FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
More Information
| SKU | 8186 |
|---|---|
| Manufacturer | Hobby Wireless |
| NDAA Compliant | No |
| Frequencies | US: 1258, 1280 |
| Item Returns | This item can be returned |