Welcome to GetFPV My Account My Wishlist Log In

KISS 2-5S 25A (40A limit) 32bit ESC

More Views

KISS 2-5S 25A (40A limit) 32bit ESC
The KISS ESC25A powered by an M4 MCU is the latest member of the KISS family, designed for racing quads with demanding motors.

Regular Price: $28.99

Special Price $26.99


The KISS ESC25A powered by an M4 MCU is the latest member of the KISS family, designed for racing quads with strong motors. With the capability of running DShot2400 and a burst current limit at 40A for a bit of headroom, this ESC offers the same functionality as its big brother, the KISS ESC32A.


  • 32-Bit-ARM Cortex M4 MCU @ 80 MHz
  • Telemetry capability (voltage, current, temperature, rpm)
  • Overcurrent protection (measures the current and reduces it to max 40A)
  • Over-temperature protection (reduces the max power if hotter then 100°C)
  • sinHybrid :: Sinwave/BackEMF Hybrid mutation for smoother running.)
  • Dshot 2400 (Full resolution of 2000 steps takes only 6.5μs).
  • Supports all common Dshot commands like turtle mode, 3D mode, and rotation direction change.
  • Expanded adaptive auto timing (7.5-30° advance on each commutation),
  • For Race Multicopters (25A continuous also with weak cooling), High max. RPM (500.000ERpm, 71.400Rpm with a 14Pole Motor
  • Accurate RPM control (2000 steps using Dshot)
  • No additional capacitor needed for 3-5S.
  • Very fast throttle response, Linear throttle response, Active freewheeling (low diode losses)
  • Regenerative braking
  • Dshot 100-2400, Oneshot42, Oneshot125 and (25 - 500 Hz) PWM get autodetected.
  • Supports FrSky Sbus, Graupner SumD, TBS CROSSFIRE, and Multiplex SRXL, S-Port, Graupner HOTT, TBS CROSSFIRE, and Sensorbus
  • 600000 ERPM maximum rotation field speed (usage up to 500000 recommended)
  • 6 Layer 70µm copper PCB where almost all of the layers can be used for the current as the logic parts sit on a separate PCB
  • All in and outputs are protected against over (~30V) and under voltage(~-30V) but are still 3,3 and 5V compatible
  • Modern smart gate driver. gate driver


  • Small size: (12.5 x 26 mm)
  • Weight: 3g
  • Operating voltage: 6 - 24V (2-5s)
  • 396µF 25V ceramic capacitors onboard
  • Maximum continuous current 25A, instantaneous maximum current 40A, actively limited


  • 1x Kiss 25A ESC


Additional Information
SKU 9050
Manufacturer Flyduino
UPC (GTIN) 721248874405
Static Block No