ImmersionRC Ghost Atto Receivers + qT Antennas Bundle
ImmersionRC Ghost Atto Receivers + qT Antennas Bundle
Out of Stock
About this product
This ImmersionRC Ghost Atto Receivers + qT Antennas Bundle is designed for both reliable control at extreme range, and extremely low latency with a best-in-class frame rate for the Race circuit. This combination includes three Ghost Atto Receivers and three qT Dipole Antennas! Fly so fast everyone will think they've seen a ghost!
VIDEO: ImmersionRC Ghost Complete Setup Guide
Features
- One Of The Smallest Receivers On the Market
- ImmersionRC Ghost qT Dipole Antenna
- ImmersionRC Ghost Atto Receivers
- Crazy Race Performance: 250Hz
- Frequency: 2.4GHz band
Tiny Receivers
Size matters. The Ghost Átto receiver weighs in at about 0.6g and is only 14.8 x 11.5mm, a 15% smaller footprint than its closest competitor.
Most standard protocols are supported, including PWM, SBus, Fast SBus (200k), SRXL-2 (400k), and an inverted SBus (or rather an inverted-inverted SBus) to increase flexibility with F4 FCs.
Deja-Vu binding ensures that receivers already ‘known’ by a Ghost transmitter (through a previous bind operation) no longer require a button press to bind them. This also goes for new receivers, which will bind for the first time without the need for the button (all of this because we can’t stand tearing models open to find that buried bind button).
2.4GHz And Long Range Capabilities
ImmersionRC is setting a new standard with its Ghost system serving both the needs of Long-Range pilots, Freestylers, and Racers.
Easily achieve ranges of 10s of km with equipment light enough, and antennas compact enough, to perfectly accompany your Nano Goblin™ into the neighboring country.
Since 2.4GHz antennas are relatively small, a directional antenna on the transmitter can easily double the expected range.
Note: All Ghost receivers currently have multiple binding methods. It is recommended to bind via SRXL2 on a standard UART, the Ghost Protocol will be available with the release of OpenTX3.4.
Specifications
ImmersionRC GHOST ATTO RECEIVER
- VTX Control: Tramp control from ‘T’ pin on Rx, regardless of the selected serial format
- Serial Formats: SBus, SBus-Fast (200k), SRXL-2 (400k), GHST, SBus Inverted
- Power Supply: 5V recommended, as low as 3.6V tolerated, no more than 5.5V
- Rx Noise Floor Analysis: Auto on power-up, or on-demand from the Tx
- Dimensions: 14.8mm x 11.5mm, 0.6g (w/o antenna)
- Sensitivity: -117dBm in Long Range mode
- Firmware: Over-the-air (OTA) upgradable
- Downlink RF Power: +13dBm
- Weight: 0.6g
ImmersionRC qT ANTENNA
- Antenna Connector: Standard U.FL (vs. Zepto which uses the much smaller MHF4)
- Frequency Range: 2.4Ghz
- Type: Center-Fold Dipole
- Length: 60mm
Note: Updated to the extremely stable v1.0.5.0 firmware release, ensuring plug and play simplicity.
Includes
- 3x ImmersionRC Ghost qT Dipole Antenna
- 3x ImmersionRC Ghost Atto Receiver
FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
More Information
| SKU | 17386 |
|---|---|
| UPC (GTIN) | 764613338089 |
| Manufacturer | ImmersionRC |
| NDAA Compliant | No |
| Frequencies | 2.4GHz |
| Item Returns | This item can be returned |