The Protek 35 Cinewhoop has a longer flight experience and weighs less than the previous cinewhoops! The new version of Protek35 has been upgraded to be compatible with the DJI O3 air unit. iFlight has increased the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun! As a result, the ProTek35 is equipped with the Butter Smooth 2205 2300KV Motors. It also features the DJI O3 air unit, BLITZ whoop F7 AIO, 55A 2-6S ESC, Nazgul 3535 propellers, and more!

Note: (Insert any product options here in black text with options in bold.)

Example: "Choose from two KV's: 1800KV (4S) or 2500KV (6S)."

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in bold.)

• T700 Quality Carbon - 40% more tensile strength compared to common 3K carbon
• High-performance True-AIO Board BLITZ F7 AIO 55A
• DJI O3 HD Air Unit Low-Latency digital transmission
• Secured Battery Plug and CNC bracket
• Lightweight one-piece frame design
• Low Resonance frame construction
• No Props or frame in view!

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at iFlight.

• Max Hover Time: Approx. 6 mins（With 1400 battery no load）
• Operating Temperature Range: -10° to 40° C (14° to 104° F)
• Takeoff Weight: Approx. 363 g (Without Battery)
• Dimensions (L×W×H): 217×194×32.5 mm
• Product Name: ProTek35 V1.4 O3 6S HD
• Max Wind Speed Resistance: Level 4
• Video Transmission: DJI O3 Air Unit 
• Maximum Takeoff Altitude: 5000 m
• Prop: Nazgul 3535 propellers
• AIO: BLITZ Whoop F7 AIO
• Frame: 151mm wheelbase
• Antennas: Single Antenna
• Motor: XING 2205 motors
• Max Speed: 140 Km/h
• GNSS: N/A

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won't need to set up another receiver. If you don't have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x ProTek35 V1.4 O3 6S HD BNF (Pre-Built, Tuned, and Tested)
• 1x 3.5 inch prop (2 pairs)
• 2x Battery Pad
• 1x LiPo Strap

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS