iFlight ProTek35 3.5" 4S Analog CineWhoop - PNP

After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops! 

iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2203.5 3600KV Motors. It also features the RaceCam R1 FPV Camera, Beast F7 AIO, 55A 2-6S ESC, 5.8GHz SucceX Mini 600mW VTX,  Nazgul 3535 propellers, and more!

Note: Battery, GoPro, and GoPro mount NOT included

Changelog:

• February 2021: Upgraded Prop Guards for more durability (Prop Guards V2.0, Material optimized)

• April 2021: Upgraded Beast F7 45A V1.0 to V1.1 (Circuit design optimized, Updated to DPS310 Barometer)
• June 2021: RunCam Nano2 2.1MM NTSC 4:3 changed to RaceCam R1 Micro 1200TVL 1.8mm 14*14
• August 2021: RaceCam R1 Micro 1200TVL 1.8mm 14*14 changed to RaceCam R1 Mini 1200TVL 2.1mm 19*19
• September 2021: Upgraded Beast F7 45A to Beast F7 55A V2

Features

• Prop Guard V2.0
• No Props or frame in view!
• High-performance True-AIO Board Beast Whoop F7 AIO 55A to save weight and space
• T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
• Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
• Low Resonance frame construction (Less Jello, more Cinematic footage)
• RaceCam R1 Mini FPV Camera 19*19
• Butter smooth 2203.5 3600KV (4S)
• Pre-tuned with smooth freestyle settings

Pre-Tuned & Pre- Setup

• Don't worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
• To restore lost tunes or updates, please check out this  linked article: "Firmware/Factory Dumps"
• Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
• Please check out this linked article on "How to disable Angle-Mode, activate Acro-Mode"

Specifications

• Board: Beast Whoop F7 AIO 55A
• Motor: XING 2203.5 3600KV (4S)
• Wheelbase: 151mm
• Body Size: 118*94.5mmmm
• Bottom plate thickness: 3.5mm
• Top plate thickness: 2mm
• Top and bottom plate spacing: 20mm (aluminum standoff height)
• Propeller size: 3.5 inch
• FC pattern: 25.5*25.5mm / 20*20mmmm
• FPV cam spacing: 20mm
• Weight: 305g (without battery)

FC // Beast F7 AIO 

• MCU: BGA-STM32F745
• Gyro: BMI270
• Blackbox: 8Mb Onboard Flash
• BEC output: 5V 2.5A
• Barometer: BMP280
• Connector: Micro-USB
• OSD: AT7456E
• FC Firmware：IFLIGHT_F745_AIO_V2
• Mounting pattern: 25.5*25.5mm φ3mm
• Dimensions: 32.5*32.5mm
• Weight: 8.5g

ESC // 55A 2-6S

• Uarts: 5
• Current Sensor: Yes
• Input: 2-6S LIPO
• Current scale: 100
• Constant: 55A / Burst: 60A
• BLHeli: BLHeli-S
• Telemetry: no
• ESC Firmware: BlheliS G-H-30
• Mounting pattern: 25.5*25.5mm/Φ3mm
• Dimensions: 32.5*32.5mm

VTX // SucceX Mini Force 5.8GHz 600mW VTX Adjustable

• Power: PIT/25/200/400mW/600mW
• Antenna interface: MMCX
• VTX protocol : IRC Tramp
• Output 40 channels.
• Size: 29*29mm
• Mounting pattern: 20*20Φ3/25*25 mmΦ2
• Weight: 4g

Recommended Parts (Not Included)

• 4S 100C 1300mAh Lipo

Includes

• Pre-built and tested Quadcopter
• 1 x ProTek35 Frame
• 1 x RaceCam R1 Mini FPV Camera 19x19mm
• 2 x TPU camera side plate soft mount
• 2 x Nazgul 3535 propeller (Set of 4 - Color May Vary)
• 1 x iFlight Lipo Strap 15*150mm (Color May Vary)
• 1 x iFlight Lipo Strap 15*250mm (Color May Vary)
• 1 x GoPro TPU bottom stand black (GoPro Protector not included)