Changelog:

September 2024: Updated to H7 chip from F7.

This iFlight BLITZ H7 AIO is a new generation board designed for the Defender 25. Featuring an H7 flight controller, 20 ESC, and OSD, this is a future-proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight, etc. Lightweight, minimum size, minimum work. Solder your motor wires on and let's go!

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• Pass-through DJI O3 and Caddx Vista/Polar Connector
• 32MB Onboard Flash Blackbox
• STM32F745, 216MHz MCU
• Weight: 12.8g/0.2g
• Updated H7 FC + 20 ESC
• ICM42688P Gyro
• DPS310 Gyro
• OSD

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

IFLIGHT DEFENDER 25 F745 FC

• Smartaudio / IRC Tramp VTX protocol supported
• Input voltage: 2-6S, support LIHV battery
• Mounting pattern: 25.5x25.5mm /3mm
• FC Firmware：IFLIGHT_BLITZ_H7_AIO
• Connector: SH1.0 to Type-C adapter
• Blackbox: 32MB Onboard Flash
• OSD: YES (HD VTX version)
• Dimensions: 32.5*32.5mm
• WS2812 LED Strip: Yes
• BEC output: 5V 2.5A
• Barometer: DPS310
• MCU: H7
• Gyro: ICM42688P
• Buzzer: Yes

IFLIGHT DEFENDER 25 20 ESC

• Supports DShot DShot150/300/600/MultiShot/ OneShot etc.
• ESC Telemetry: Yes（PCB routed, set UART6 for telemetry）
• Output current: 20A, peak value 30A (10 seconds)
• Input voltage: 2-6S Support LIHV battery
• ESC firmware: IFLIGHT_BLITZ_G071_01
• Current sensor: ratio 200 (1/10mV/A)
• Bidirectional DShot: Yes
• ESC MCU: STM32G071
• Driver: FD6288
• BEC: NO

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x iFlight Defender 25 BLITZ AIO - H7 FC + 20A ESC + OSD
• 10x 0.8mm black Heat shrink tube 10mm
• 1x XT30U Male 18AWG cable 70mm
• 2x Capacitor 470uF/35V (Onboard)
• 1x 1.0-7P cable 50mm-28mm
• 8x M2 Transparent Nylon Nut
• 4x M2 silicon grommets
• 1x 1.0-7P cable 50mm
• 8x M2*12mm screws

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS