iFlight is proud to offer the Cidora SL5-E 5" FPV Racing Drone, which comes with two different KV motors: XING-E 2207 2450KV (4S) or 1800KV (6S).  The installed and pre-tuned SL5-E is 5" is a fully built drone that comes with everything you need to liftoff, all you need to do is add your own receiver!

NOTE: The Hero 7 camera and TPU print camera mount are NOT included. 

Features

• Full 3K Carbon Fiber airframe
• Easy arm swaps -215mm wheelbase，115g
• Popular Squish X configuration
• SucceX-E F4 with 45A 4in1 ESC stack

Specifications

• Total Dimensions: 165*138mm (body dimension)
• Frame Wheelbase: 215mm
• SucceX-E F4 Flight controller
• SucceX-E 45A 2-6s 4-in-1 ESC Dshot1200
• XING-E 2207 2450KV (4S)/XING-E 2207 1800KV (6S)
• Caddx.us Ratel 2.1mm FPV cam
• Nazgul 5140 propellers grey
• Weight: 384.2 (without GoPro TPU mount)

SucceX-E F4 Flight controller 

• MCU：STM32F405
• IMU：MPU6000
• Betaflight OSD：YES
• Blackbox：8MB
• 4X Uarts（1 2 3 6 )
• 8 x Dshot/Proshot/Oneshot output
• 8 x individual ESC power/ signal pads
• 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
• VTX protocol：YES（IRC Tramp）
• WS2812 led Strip：YES
• Baro：No
• Beeper：YES
• Input：2-6S（Max 8S）
• BEC：5V/2.5A cont
• Physical
• Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm
• Dimensions：36*36mm
• Weight：7.6g

Betaflight

• Betaflight Firmware：betaflight_4.0.5_BETAFLIGHTF4.hex

Physical

• Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm
• Dimensions：36*36mm
• Weight：7.6g

SucceX-E 45A 4in1 ESC

• Dimension: 40*43mm
• Mounting Holes: 30.5*30.5mm/Φ3mm
• Weight:14.4g
• Supports 2-6S Lipo input
• STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
• Current sensor: YES
• BEC: NO
• Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
• Target: G-H-30 BLS 16.7
• BLHeliSuite download: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file
• Input voltage: 5V
• Channel: 48

SucceX the Force 5.8G 800mW VTX

• Tramp telemetry with OSD/Lua script frequency and output power control

• Stable power transmission, ideal for long-range flights
• Power settings 25mW/200mW/400mW/800mW;
• 48 Channels including Raceband
• Frequency fast lock, soft start to reduce interference with other pilots
• Built-in output power self-check function;
• Full format video format: NTSC /PAL;
• Wide input voltage range. low power consumption:
• 7V～28V，+12V/500mA@800mW;
• Small size: 36mm×36mm×8mm;
• Mounting holes 4-M3
• Lightweight: ≤11g(excluding antenna)

Caddx.us Ratel 2.1mm lens FPV cam

Recommend Parts (Not included)

• TPU 3D Printed Camera Mount for Gopro Hero 5/6/7 with ND8 Filter
• TPU 3D Printed Camera Mount for GoPro Session

Includes

• 1 x Cidora SL5-E 4S 6S FPV Drone - PNP
• 2 x Nazgul 5140 propellers