iFlight Cidora SL5 5" FPV Racing Drone - PNP
iFlight Cidora SL5 5" FPV Racing Drone - PNP
$0.00
Select options for stock status
Only left for same day shipping. Order now!
iFlight Cidora SL5 5" FPV Racing Drone - PNP
iFlight is proud to offer the Cidora SL5 5" FPV Racing Drone, which comes with two different KV motors: XING Camo X2306 2450KV (4S) or 1700KV (6S).
About this product
iFlight is proud to offer the Cidora SL5 5" FPV Racing Drone, which comes with two different KV motors: XING Camo X2306 2450KV (4S) or 1700KV (6S). The installed and pre-tuned SL5 is 5" is a fully built drone that comes with everything you need to liftoff, all you need to do is add your own receiver!
NOTE: The Hero 7 camera and TPU print camera mount are NOT included.
Features
- Full 3K Carbon Fiber airframe
- Easy arm swaps -215mm wheelbase,115g
- Popular Squish X configuration
- SucceX F7 TwinG Bluetooth with 50A 4in1 ESC stack
Specifications
- Total Dimensions: 165*138mm (body dimension)
- Frame Wheelbase: 215mm
- SucceXF7 TwinG Bluetooth FC
- SucceX 50A 2-6s 4-in-1 ESC Dshot1200
- XING CAMO X2306 2450KV (4S )/ XING CAMO X2306 1700KV(6S)
- Caddx.us Ratel 2.1mm FPV cam
- Nazgul 5140 propellers
- Weight: 384.2 (without GoPro TPU mount)
SucceX F7 TwinG BT Flight Controller(TwinICM20689)
- MCU:216MHz STM32F722RET6
- Gyro: 2x ICM20689(SPI)
- Baro: Yes (Altitude on your OSD)
- Betaflight OSD:YES
- Bluetooth wireless adapter (Antenna integrated, can be linked to the SpeedyBee smartphone app)
- Blackbox: Onboard 32MB
- 5x UARTs
- 8x Motor outputs
- 8-pin 4in1 ESC port
- 4-pin VTX connector
Betaflight
- Betaflight Firmware:betaflight_4.0.5_STM32F7X2.hex
- CLI dump file:IFLIGHTF7_TWIN_G.config
Physical
- Mounting hole:30.5*30.5mm,φ4mm with Grommets φ3mm
- Size:36*36mm
- Weight:6.2g
SucceX 50A 2-6S 4-in-1 ESC Dshot1200
- Dimension: 43*39mm
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Weight:14.4g
- Volts input: 2-6S
- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
- Current sensor: Yes
- Telemetry:Supported
- BEC: No
- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
- Target: iFlight-BL32-4IN1
- BLHeliSuite download (BL32):http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file
SucceX the Force 5.8G 800mW VTX
- Tramp telemetry with OSD/Lua script frequency and output power control
- Stable power transmission, ideal for long-range flights
- Power settings 25mW/200mW/400mW/800mW
- 48 Channels including Raceband
- Frequency fast lock, soft start to reduce interference with other pilots
- Built-in output power self-check function;
- Full format video format: NTSC /PAL;
- Wide input voltage range. low power consumption:
- 7V~28V,+12V/500mA@1000mW;
- Small size: 36mm×36mm×8mm;
- Mounting holes 4-M3
- Lightweight: ≤11g(excluding antenna)
Recommend Parts (Not Included)
- TPU 3D Printed Camera Mount for Gopro Hero 5/6/7 with ND8 Filter
- TPU 3D Printed Camera Mount for GoPro Session
Recommend batteries (Not Included)
- 4S 1300mAh to 2000mAh
- 6s 1050mAh to 1500mAh
Note: You must add your own receiver
Includes
- 1 x Cidora SL5 4S 6S FPV Drone - PNP
- 2 x Nazgul 5140 propellers
- 1 x LED Lights
iFlight Support
iFlight FAQ - https://iflightrc.freshdesk.com/support/home
More Information
SKU | 12024 |
---|---|
Manufacturer | iFlight |
NDAA Compliant | No |
Item Returns | This item can be returned |