Introducing the iFlight Chimera4 4" 4S LR Freestyle Quadcopter! This 4" long-range can stay in the air for up to 15mins with at least a 4S 850mAh and comes with the RunCam Nano 2 camera, XING 1404 motors, and GPS!

The GPS functionality to help you find your way back when flying, and also Betaflight GPS Rescue mode (default OFF to prevent unexpected behavior. Setup instructions included). 

Note: F.Port protocol RX input support, telemetry not supported. Batteries and camera mount NOT included. Motor color may vary.

Video

Features

• Sub 250g long-range quad
• XING 1404 (4S) 3000KV/3800KV 
• X-Geometry body for high-performance handling and max. authority on the pitch axis
• DC (DeadCat geometry) bottom plate available (additional item, no props in view)
• GPS pre-installed for more safety at a distance
• SucceX-E mini F4 +35A 4in1 ESC Flystack
• Naked GoPro ready
• 360° TPU protection, FPV cam protection, and antenna mounts
• RunCam Nano 2 Camera

Specifications

Frame: Chimera4

• Wheelbase: 178mm
• Main body dimension: 136.8*114.8mm
• Bottom to top distance: 28mm
• Arm thickness: 4mm
• Bottom plate thickness: 4mm
• Top plate thickness: 2mm
• TPU Camera plate thickness: 2mm
• FC: 25.5*25.5mm/20*20mm/16*16mm
• FPV Cam: 19mm Micro / 20mm

SucceX-E mini F4 Stack (35A 4-in-1 ESC): SucceX-E mini F4

• MCU: 168MHz STM32F405

• Gyro: MPU6000
• Blackbox: 8MB
• Betaflight OSD: YES
• BEC: 5V 2.5A
• Uarts: 5
• ESC Telemetry: yes
• INA Pad: nuart2
• Input voltage: 2-6S
• Firmware: BETAFLIGHTF4
• Size: 25*25mm /20*20mm φ3 mounting
• Mounting hole: 20*20mm，φ3mm
• Size: 25*25mm
• Weight: 4g

SucceX-E mini 35A ESC

• MCU: BB21 F16G

• BLHeliS
• Capacitance: 470uF/50V
• Current Sensor: Yes
• Input: 2-6S LIPO
• Constant: 35A / Burst: 40A
• BEC: No
• Supports up to Dshot600, Proshot, Oneshot, Multishot
• Target: G-H-30
• BLHeliSuite download
• Weight: 6.9g
• Mounting pattern: 20*20, φ3mm with Grommets φ2mm
• Dimensions: 31*30mm (including the power pads)

SucceX-Force 800mW adjustable VTX

• Input voltage: 5V
• Output voltage/ Max current: 5V 1A
• 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@400mW, 380mA@800mW
• Channel: 48
• size:36*36*3mm
• PIT/25mW/200mW/400mW/800mW

Additional Suggested Parts (Not Included)

• 4S 850mAh/ 4S 1100mAh
• TPU Naked GoPro Mount

Pre-Tuned & Pre-Setup

• Don't worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
• To restore lost tunes or updates, please check iFlight's linked article on "Firmware/Factory Dumps"
• Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
• GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behavior.
• Please check iFlight's linked article on "GPS Rescue Mode // Setup"

Includes

• 1 x Chimera4 frame
• 1 x RunCam Nano 2 Camera
• 1 x Albatross LHCP ipex 160mm antenna
• 2 x Sets Nazgul 4030 props (Set of 2 - Color may vary)
• 2 x 15*150mm Microfiber PU Leather Battery Strap (Color May Vary)