What if you could get the combined MCU speed and ESC power of a big stack, but carefully arranged on a 25x25 whoop size board? That would be crazy right? Well, iFlight just did it... This is the new iFlight BLITZ series AIO FC for your ultimate build. A future-proof all-in-one FC featuring an F411 flight controller, 5A ESC, 50mW VTX, and a built-in ELRS receiver. Lightweight, minimum size, minimum work.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: Diatone Mamba H743 MK4 FC & 128K ESC Unboxing

• Support BLHeliSuite programmable
• Built-in ELRS 2.4G Receiver
• 5A continuous current
• Super light only 4.8g
• MCU：STM32F411
• Power supply: 1S
• Gyro: BMI270

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

IFLIGHT BLITZ F411 FC + ELRS RX

• Weight: 4.8g (with power cable, VTX, and VTX antenna)
• Mounting pattern: 25.5*25.5mm/φ3mm （half-hole)
• FC Firmware: IFLIGHT_BLITZ_F411RX
• Supported Protocols: ELRS 2.4Ghz
• BEC output: 5V 500mA
• Connector: Micro-USB
• MCU: STM32F411
• INA pad: n uart2
• Barometer: NO
• Size: 29*29mm
• Gyro: BMI270
• Blackbox: NO

IFLIGHT BLITZ 5A 1S ESC

• ESC Firmware: O-H-30 BLS 16.8 (BlheliS) / Bluejay Q-H-50 (Bluejay)
• Signal Support: Dshot, Oneshot, Multishot
• Current: 5A continuous and peak 6A
• Current sensor: yes
• ESC Telemetry: NO
• Current scale: 400
• Input: 1S

50MW VTX

• Protocol: Smart audio
• Power: PIT/25/50mW
• Connector: UFL/IPEX
• Input voltage: 5V
• Channels: 48CH

IMPORTANT NOTES

• F.PORT protocol RX input support, telemetry not supported.

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x iFlight BLITZ F4 V1 Whoop AIO Board - F411 FC + 5A 1S ESC + 50mW VTX + ELRS 2.4Ghz RX
• 4x M2 Dampers
• 1x Antenna

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS