Welcome to GetFPV My Account My Wishlist Log In

Holybro Shuriken X1 V2 - DSMX

Holybro Shuriken X1 V2 - DSMX
The Shuriken X1 is a ultra high performance FPV racing drone of the latest design from Holybro. Every component has been well thought out for high speed crashes, tuned tested and re-tuned.
Out of Stock

Shuriken X1 is a high performance FPV racing drone of the latest design from Holybro. Shuriken X1 has FC; OSD; PDB and VTX all highly integrated, which enables us to get all those modules assembled expediently without additional soldering. The height of this racing drone is very much lower than those conventional X frames, even when it has the Gopro Session mounted on it. Shuriken X1 consists of those components with the best performance and reputation Just take it out of the box and enjoy the very fierce but yet stable flying!


  • Full 3K Carbon Fiber
  • Nickel-plated 12.9 screws
  • Easy grip black anodized spacers
  • FC;OSD;PDB;VTX and voltage/current sensor All In 1 Board
  • 5.8GHz, 200/600mw switchable, 40 Channel Vtx with built in push button switching and channel display
  • High quality antenna
  • Integrated MWOSD (firmware V1.5 preloaded)
  • 1/3 SONY Super HAD II CCD, PAL, 600TVL Camera, 2.5mm Lens
  • S.bus, DSMX, or PPM Receivers Compatible 
  • RGB LED board
  • Two mounting positions for the FPV Camera: one for a 0°~40° view angle, a second mounting position for 35°~70° view angle
  • Included TPU GoPro Session mount. HD Camera angle 35°
  • BetaFlight Pre-loaded


  •  32-bit F3 Flight Controller, MPU6050 Gyro/Accelerometer
  • ATmega328P with Arduino Bootloader(minim OSD)
  • MAX7456 Monochrome On-Screen Display(minim OSD)
  • FTDI Cable Compatible Pinout(minim OSD)
  • OneShot125 BLheli F39X 30A / 40A burst BLHeli ESCs
  • 2305-2600kv Motors (T-MOTOR)
  • Compact size for 5" propellers, 200mm motor to motor.
  • Input voltage 7v to 42v.
  • PCB Maximum Continuous Current 120A
  • Filtered voltage output - output 5.2v 2A
  • Weight, ~343g without battery


  • 1 x Shuriken X1 
  • 1 x Flight Contoller
  • 1 x PDB
  • 1 x Receiver
  • 4 x ESC
  • 4 x 2305 Motor
  • 12 x 5 Inch Propeller
  • 1 x 40CH VTX
  • 1 x 600TVL Cam
  • 1 x 5.8G 4 skew planar antenna 
  • 1 x  Gopro session protector (TPU 3D Print)
  • 2 x Battery strap


Additional Information
SKU 7099
Manufacturer Holybro

FPV Regulatory Notice

The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

Also Purchased