The Holybro Kakute H7 Mini Stack features the Tekko32 F4 BigFET 50A ESC and Kakute H7 FC with a 20x20 mounting pattern.

VIDEO: Holybro Kakute H7 Mini Stack - Overview & Setup

Features

• Mini Stack by Holybro (20x20)
• Tekko32 F4 BigFET 50A ESC
• Kakute H7 FC

F4 MCU / PWM output up to 96K / 4~6S / BLHELI32

Tekko32 F4 BigFET are made for those that use 20x20 mount and also need the power of big MOSFET. The F4 MCU & quality big MOSFET onboard will provide smooth control, quick response, and big power for racers and freestyle pilots.

Specifications

KAKUTE H7 MINI FLIGHT CONTROLLER

• Firmware Target: KAKUTEH7MINI
• ESC Connections: 8
• Input Voltage: 2-6S
• Stack Size: 20x20
• MCU: STM32H7
• IMU: MPU6000
• OSD: AT7456E
• Barometer: Yes
• Weight: 5.5g
• Buzzer: Yes
• BEC: 5v/2A
• Uarts: 6

TEKKO32 F4 MINI BIGFET 50A ESC

• Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
• Mounting holes: M4 30.5x30.5mm (M3 grommets included)
• Amperage meter scale ratio: 168
• Onboard analog current sensor
• Continuous Current: 50A x4
• Dimensions: 39x36.5x6mm
• ESC telemetry Supported
• Burst Current: 60A x4
• Supports 4-6S battery
• BLHeli_32 firmware
• No output BEC
• Weight: 11.8g

Links

• Tekko32 F4 4-in-1 Mini BigFET 50A ESC
• BLHeli_32 ESC Firmware Overview
• Holybro Kakute H7 Mini Manual
• BLHeli_32 GitHub

Includes

• 1x Holybro Mini Stack - Kakute H7 FC + Tekko32 F4 BigFET 50A ESC - 20x20
• 1x JST SH 6pin to GH 8pin 150mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
• 1x JST SH 6pin 150mm cable*1 ( The cable that goes to the CADDX Vista Air Unit is included.)
• 1x JST SH 6pin to GH 8pin 80mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
• 1x 1000uF 35v Electrolytic capacitor
• 1x JST SH 8pin to 8pin 65mm cable
• 1x JST SH 8pin to 8pin 25mm cable