Holybro Kakute H7 BT - Tekko32 F4 50A BLHeli32 4-in-1 ESC Stack
Holybro Kakute H7 BT - Tekko32 F4 50A BLHeli32 4-in-1 ESC Stack
$159.99
Holybro Kakute H7 BT - Tekko32 F4 50A BLHeli32 4-in-1 ESC Stack
The Holybro Kakute H7 BT + Tekko32 F4 50A 4-in-1 ESC stack brings lots of power all in a 30.5x30.5 mounting size! This stack can push 50A all while bringing you the latest features!
About this product
The Holybro Kakute H7 BT + Tekko32 F4 50A 4-in-1 ESC stack brings lots of power all in a 30.5x30.5 mounting size! This stack can push 50A all while bringing you the latest features!
Kakute H7 Flight Controller
Specifications
- MCU - STM32H743 32-bit processor running at 480 MHz
- IMU - MPU6000
- Barometer - BMP280
- OSD - AT7456E
- Onboard Bluetooth chip - ESP32-C3
- SpeedyBee IOS & Android App Compatible
- Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm).
- 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
- 9x PWM Outputs (8 Motor Output, 1 LED)
- 2x JST-SH1.0_8pin port (4in1 ESCs, x8/Octocopter compatible)
- 1x JST-GH1.5_6pin port (For HD System like Caddx Vista & Air Unit)
- Battery input voltage: 7V to 42V
- BEC 5V 2A Cont.
- BEC 9V 1.5A Cont.
- Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
- Dimension - 35x35mm
- Weight - 8g
Tekko32 F4 50A BLHeli32 4-in-1 ESC
Features
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM output up to 96K (default 48K)
- A separate drive & control circuit broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Specification
- Continuous Current: 50A x4
- Burst Current: 60A x4
- Supports 4-6S battery
- Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- No output BEC
- BLHeli_32 firmware
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 168
- Dimensions: 45x37x6mm / Weight: 13.8g
- Mounting holes: M4 30.5x30.5mm (M3 grommets included)
Pin MAP
Includes
- 1 x Kakute H7 BT STACK
- 1 x Electrolytic capacito: 1000uF 35v
- 1 x 8pin to 8pin 1mm pitch 65mm cable
- 1 x 8pin to 8pin 1mm pitch 25mm cable
- 1 x JST GHR 8pin to JST GHR 6pin 80mm cable (for DJI/Caddx HD System)
- 1 x JST GHR 8pin to JST GHR 6pin 150mm cable (for DJI/Caddx HD System)
More Information
SKU | 17515 |
---|---|
UPC (GTIN) | 764613339819 |
Manufacturer | Holybro |
NDAA Compliant | No |
Mounting Pattern | 30.5x30.5mm |
Item Returns | This item can be returned |