+1 (941) 444-0021CONTACT US

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

HIEE 9'' 5.8GHz Diversity FPV Monitor

Quick Overview

The HIEE 9'' 5.8GHz Diversity FPV Monitor.
Out of Stock

Regular Price: $199.00

Special Price $99.99


Built in 5.8GHz race-band receiver with antenna diversity to find the best available signal, compatible with Fat Shark race band allowing larger and interference free transmissions. Multiple input and output interfaces to cameras, computers and television.Optimized menus for setup and configuration. DNR (Digital Noise Reduction) smooths out video image. Easy to use front access controls and a 7.4V 1800mAh battery.


  • 9 inch HD Resolution 1024 x 600
  • High brightness 500cd/m2
  • 5.8ghz 40CH with R band
  • A key for searching automatically
  • Built-in removable 7.4V 1800MAH li-battery
  • Big foldable sun hood available


  • Screen Type: TFT LCD 
  • Working Voltage: DC-IN 7.4-22.2V 
  • Input Power: 14.5W(DC 12V) 
  • Dimension: 198mm x 132mm x 26mm 
  • Working Temperature: -10℃~+ 65 ℃ 
  • Weight : 490g
  • Battery: 1800MAH li-po battery

FR FR1(A) 5865M 5845M 5825M 5805M 5785M 5765M 5745M 5725M
FR2(R) 5658M 5695M 5732M 5769M 5806M 5843M 5880M 5917M
FR3(E) 5705M 5685M 5665M 5645M 5885M 5905M 5925M 5945M
FR4(F) 5740M 5760M 5780M 5800M 5820M 5940M 5860M 5860M
FR5(B) 5733M 5752M 5771M 5790M 5809M 5828M 5847M 5866M

Additional Information

SKU 7168
Manufacturer Hiee
  1. Ok... review by Frost on 5/18/2017

    This will be just a build quality and feature review as I have no other receiver to compare it to.

    The plastic feels strong, relatively easy to disassemble, the screens is bright enough, i/o is nice.

    The antenna connectors are male (I expected female).
    It does not include a charger so you will need to use your batteries for that.
    The plastic cover is so hard to take off (or I am dumb) that I broke one of the small tabs in the process.

    Mine came with a screen protector but it was stuck under the plastic front cover so I had to disassemble it to remove the protector(which was already scratched).

    Inside I uncovered a few drops of solder and molten plastic on the pcb. They seem to be using just some pre-built module/screen&io controller and solder it onto a breakout board together with the receiver modules .
    The battery just has 2 leads but it is a 2 cell so that means the charging system doesn't balance them. In the long run that will ruin the life-cycles of the pack.

    The buttons on the front vary in click sound.
    The battery could had been bigger(loads of unused space).
    Millions of holes on the back begging for a drop of rain to fall in.

    In the end, loads of little problems, but it works and is priced less that the competition so it's fine.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Also Purchased