The HGLRC Draknight 2" 2S Beginner RTF Kit is the ideal beginner's gateway into FPV flying, offering a hassle-free, fully assembled kit. Its compact design, powered by 2S LiPo batteries, ensures a perfect blend of performance and flight time for both indoor and outdoor use. With a stable flight controller and durable build, this set provides everything needed to start flying right out of the box.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: AWESOME NEW HGLRC FPV KIT FOR BEGINNERS - DRAKNIGHT RTF

• Beginner-Friendly Flight Controller
• Powered by 2S LiPo Batteries
• Complete FPV Setup
• 2" Compact Design
• Ready-to-Fly (RTF)
• Durable Build

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

REMOTE CONTROLLER

• Common Operations: Frequency Pairing, Power Adjustment, Joystick Calibration
• Switch Design: Mix and Match (Three-Stage and Two-Stage)
• Model: HGLRC C1 Radio Controller w/ Dongle - ELRS
• Third-Party Compatibility: Receivers and Tuners
• USB Interfaces: USB-A, USB-C (Dual Interfaces)
• Radio Frequency Module: Built-in 500mW
• Remote Control Distance: Extended
• Wireless Dongle Compatibility: Yes
• Operation Procedures: Simplified
• Signal Transmission: Stable
• Type: Handle Control
• Screen: Not Required
• Level: Entry-Level
• Value: High-Value

DARKNIGHT DRONE

• Built-in image transmission: 0-25-100-400mW (adjustable)
• Weight: 44.3g (excluding the weight of the receiver)
• Recommended propeller: Gemfan2023 propeller
• Flight control firmware: HGLRCF411SX1280_15A
• Firmware: BF HGLR-HGLRCF411SX1280_15A
• Built-in receiver: UART ExpressLRS 2.4G
• Maximum supported paddle: 2 inches
• ESC protocol: Dshot150/300/600
• ESC firmware: Z-H-30 (Blheli_S)
• Master control: STM32F411
• Continuous current: 12A
• Input voltage: 2-4S Lipo
• Peak current: 15A (5s)
• BEC output: 5V/1.5A
• Wheelbase: 91.8mm
• Specter 1003 Motor
• Motor: 10000KV (2s)
• Size: 104*104mm
• Type: 52 inch rack

DONGLE 

• Built-in ELRS Maximum Supported Frequency: 250MHz
• External Receiver Support Protocol: CRSF Protocol
• ELRS Firmware Upgrade Method: Wifi or USB Plug
• ELRS Firmware Name: HGLRC 2.4GHz
• Receiving Distance: More Than 200m
• ELRS Firmware Version: ELRS 3.0
• Size: 74x21x12.5mm
• Working Voltage: 5V
• Interface: USB-C
• Weight: 9.5g

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x VR100 5.8GHz Analog Transmission Goggles
• 1x 82mm Philips 1.5 Screwdriver
• 1x Darknight Instruction Manual
• 1x 3.5mm Conversion Cable
• 1x M2 Hexagonal L Wrench
• 1x USB-C Charging Cable
• 1x 915MHz FPC Antenna
• 1x C3 Charger Manual
• 1x C1 Remote Control
• 1x 2" Darknight Drone
• 1x Charge Power Cord
• 1x Propeller Extractor
• 1x Wireless Dongle
• 1x Mirco Data Cable
• 2x 720mah Battery
• 1x C3 Charger
• 8x Propellers
• 1x Sticker
• 1x Case
• 1x Card

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS