Welcome to GetFPV My Account My Wishlist Log In

Heli-Nation Talon F7 20x20 Flight Controller

Heli-Nation Talon F7 20x20 Flight Controller
A new generation of Talon is here. With an F7 processor and 8S capable, Talon is the only 20X20 on the market with a STM32F722RET6 216MHz processor.
In Stock
$32.99
Description

A new generation of Talon is here. With an F7 processor and 8S capable, Talon is the only 20X20 on the market with a STM32F722RET6 216MHz processor. Built in Betaflight OSD, 6 UARTS, and dedicated LDOs for cleaner gyro and OSD signals makes Talon F7 the most powerful 20X20 FC on the market.

One of the features Talon F4 users praised is the choice of using the 8 pin harness or direct soldering motor ports to the ESC. We’ve kept that option, while still adding more features, by letting you remove the plastic connector to reveal motor ports. The 8 pin harness will be a direct pinout for the forthcoming Aikon 20X20 6S ESC.

Features

  • MCU: STM32F722RET6 216MHz
  • 6-Axis ICM20602 32K
  • Built in Betaflight OSD
  • Up to 8S (36V) direct battery power
  • Buzzer pads for external buzzer
  • Build in voltage monitoring resistor
  • 5V 2A BEC
  • Dedicated LDO for gyro for cleaner gyro signal
  • Dedicated LDO for OSD for cleaner OSD signal
  • Led strip shares 5V with 5V/2A BEC
  • 6 UARTS: UART1, UART2, UART3, UART4, UART5, UART6
  • Built in camera control pin with resistor and capacitor
  • 4 Full UARTS with RX/TX pins
  • Logical pin layout for cleanest build possible
  • 8 pin 4 IN 1 ESC plug (Direct solder motor ports underneath)
  • Remap able LED pad for additional motor output
  • TX3 & RX3 can be used for I2C for external compass
  • 5V or 3.3V selectable receiver power
  • 5V, VBAT selectable VTX and CAM power
  • Includes * pin connector (Aikon compatible), 8 grommets, M3 to M2 nut adapters, M3X5 standoffs

Includes

  • 1x Flight Controller
  • 1x Hardware Kit
  • 1x 8pin Harness
  • 1x XT30 Connector

Additional Information
SKU 9623
Manufacturer Heli-Nation
UPC (GTIN) 721248875396
Reviews