The Happymodel SuperX AIO combines an F4 Flight Controller with a 5A 1S BLHeli_S ESC in one compact, all-in-one (AIO) board, perfect for micro drone builds. This powerful combination provides exceptional flight performance, making it ideal for ultralight whoops and other small crafts. The F4 FC offers smooth and responsive control, while the 5A ESC, running BLHeli_S firmware, ensures efficient and reliable power delivery. With its lightweight design and integrated features, the SuperX AIO is a top choice for pilots looking to build or upgrade their micro drones with minimal hassle.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• Compact and Lightweight
• F4 Flight Controller
• High Compatibility
• Ideal for Upgrades
• All-in-One Design
• 5A BLHeli_S ESC

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

ELRS RECEIVER

• ExpressLRS Firmware Target: HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flasher)
• Firmware Update: Can flash single ELRS receiver firmware via Wi-Fi
• Compatibility: Compatible with ExpressLRS V3.x.x TX Module
• Packet Rate Option: 50Hz/150Hz/250Hz/500Hz
• Available From: ExpressLRS version 3.4.0 RC2
• Antenna: Enameled copper wire antenna
• Receiver Protocol: Serial-based CRSF
• ExpressLRS Firmware Version: V3.0
• Telemetry Output Power: <12dBm
• RF Frequency: 2.4GHz

FLIGHT CONTROLLER

• MCU: STM32F411CEU6 (100MHz, 512K FLASH), ESP32-PICO-D4
• Built-in Current Meter Sensor: Current meter scale 1175
• Built-in Voltage Meter Sensor: Voltage meter scale 110
• Built-in 5.8G OpenVTX: 0mw~400mw (MSP control)
• Power Supply: 1S battery input (DC 2.9V-4.35V)
• Built-in 5A (each) BLHeli_S: 4-in-1 ESC
• Built-in Betaflight OSD: (SPI Control)
• Mount Hole Size: 25.5mm x 25.5mm
• Sensor: BMI270 (SPI connection)
• Built-in UART: ExpressLRS v3.0.0

ESC

• Recommended ESC Startup Power Value: Min 1100 / Max 1200
• Current: 5A continuous, peak 6A (3 seconds)
• Support: BLHeliSuite programmable
• Factory Firmware: Bluejay v0.19.2
• Power Supply: 1S LiPo/LiPo HV
• Firmware Target: O-H-5 48kHz
• Default Protocol: DSHOT300

5.8GHz VTX

• Transmitting Power: 0/RCE/25mw/100mw/400mw
• Current (5V): <650mA (400mw)
• Firmware Version: OPENVTX
• Antenna Connector: U.FL
• Power Supply: DC 5V
• PIT Mode: Support
• Channels: 40ch
• VTX: MSP

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x Happymodel SuperX AIO - F4 FC + 5A 1S BLHeli_S ESC

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS