Happymodel Mobula6 1S Brushless Whoop Micro Drone (FrSky)

Happymodel Mobula6 1S Brushless Whoop Micro Drone (FrSky)

Select options for stock status

Only left for same day shipping. Order now!
Earn

Options

Happymodel Mobula6 1S Brushless Whoop Micro Drone (FrSky)
Happymodel has done it again. Introducing the Mobula6 Micro FPV Whoop, which features the Runcam Nano 3, Onboard Frsky Receiver, 5A BLheli_S 4-in-1 ESC and more! Pick a motor! Race(25000Kv) or Standard (19000Kv). Now with OpenVTX and Crazybee F4 Lite V3.1

About this product

Happymodel has done it again. Introducing the Mobula6 Micro FPV Whoop, which features the Runcam Nano3, Onboard Frsky Receiver, 5A BLheli_S 4-in-1 ESC and more! This mini and lightweight whoop (65mm) will take you hard-to-get places! Now with OpenVTX and Crazybee F4 Lite V3.1.

Pick a motor: Race (25000Kv) or Standard (19000Kv).

Features

  • AIO 4IN1 Crazybee F4 Lite V3.1 flight controller with built-in 5.8G OpenVTX
  • Extreme light 1S 65mm Brushless whoop only 20g
  • Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
  • Smooth and powerful
  • Compatible for 1S Lipo/LIHV
  • Camera Angle adjustable

Specifications

  • Brand Name: Happymodel
  • Item Name: Mobula6 1S 65mm Brushless whoop drone BNF version
  • Wheelbase: 65mm
  • Size: 80mm*80mm*37mm
  • Weight: 20g
  • Receiver option:
  • Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
  • Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
  • Motor speed option:
  • SE0802 KV25000(Race Edition)
  • SE0802 KV19000(Regular Edition)

Motors

  • Model: SE0802 19000KV or KV25000
  • Configuration:9N12P
  • Stator Diameter:8mm
  • Stator Length:2mm
  • Shaft Diameter: Φ1mm
  • Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
  • Weight(g):1.9g
  • No.of Cells(Lipo):1S only

Propellers

  • Gemfan 1219-3
  • Center Thickness:5mm
  • Prop Disk Diameter:31mm
  • Center Hole Inner diameter:1.0mm
  • Weight:0.28g

Flight controller

  • (Frsky SPI RX version) CRAZYBEE F4 Lite V3.1 Frsky version Firmware target: CrazybeeF4FR
  • (Flysky SPI RX version) CRAZYBEE F4 Lite V3.1 Flysky version Firmware target: CrazybeeF4FS
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: ICM20689(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G OpenVTX
  • Built-in SPI Frsky/Flysky receiver
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard 4in1 ESC

  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_5_REV16_7.HEX
  • Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version

  • SPI BUS receiver Frsky D8 compatible
  • Compatible Non EU transmitter D8 modelChannels: 8ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

Onboard Flysky SPI receiver Version

  • SPI BUS receiver
  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
  • Failsafe support

Onboard 5.8g OpenVTX

  • Output power: 0-400mw
  • Frequency: 48CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Frequency: 5.8GHz 5bands 48 channels
  • With Race band Smartaudio ready

Runcam Nano3

  • Model: RunCam Nano 3
  • Image Sensor: 1/3″ CMOS
  • Horizontal Resolution: 800TVL
  • Lens : 2.3mm(M6.5) FOV 140°
  • Signal System: NTSC
  • S/N Ratio: >50dBElectronic Shutter Speed: Auto
  • Auto Gain Control (AGC): Auto
  • Min. Illumination: [email protected]
  • D-WDR: Auto
  • Day/Night: Color
  • Power:DC 3-5.5V
  • Current: 110mA@5V [email protected]
  • Housing Material: ABS
  • Net Weight: 1.2g
  • Dimensions: L14mm*W14mm*H9mm

Lipo Battery

  • Capacity:300mAh
  • Voltage:3.8v
  • Continuous Discharge Rate: 30C
  • Size: 57mmx12mmx7mm
  • Weight: 8gConnector: PH2.0

Includes

  • 1 x Mobula6 1S 65mm whoop Drone Frame 
  • 1 x SPI Receiver Option1: Crazybee F4 Lite V3.1 FC built-in Frsky SPI D8 RX 
  • 1 x SPI Receiver Option2: Crazybee F4 Lite V3.1 FC built-in Flysky SPI RX
  • 4 x SE0802 KV19000 or KV25000 brushless motor 
  • 1 x Gemfan 1219-3 Propellers(4cw+4ccw) 
  • 1 x Runcam Nano3 1/3 CMOS 800TVL camera 
  • 1 x 5.8G 0-400mw 48ch OpenVTX (Flight controller built-in) 
  • 4 x S 300mah 30C LiHV Battery 
  • 1 x S Lipo/LIHV USB Charger 
  • 1 x Propeller disassemble tool
 

More Information

SKU 12260
Manufacturer Happymodel
NDAA Compliant No
Item Returns This item can be returned

Also Purchased

XILO 550mAh 1s 50c High Voltage Lipo Battery (JST-PH 2.0)
$8.99
Back Ordered
Lumenier 205mAh 1s 25c Lipo Battery - JST-PH 2.0
$3.99