The Happymodell Larva-X HD Micro is a great racing FPV drone! A cool feature about the Larva-X HD is that you can easily transform it into a toothpick or whoop style. The Larva-X HD features the Caddx Baby Turtle, four different receivers to choose from, EX1203 High-efficiency Brushless Motors, and tons of cool specs!

Receiver options: Frsky XM+, Frsky RXSR, DSMX, Crossfire

Features

• Toothpick HD and Whoop HD 2 in 1 combo (Default Comes in Toothpick HD style)
• Toothpick style compatible both 2.5inch or 3inch propellers
• New design EX1203 High-efficiency brushless motors
• Caddx baby Turtle provides 1080P 60FPS DVR video
• Camera Angle adjustable
• Full range receiver options
• Buzzer ready
• Smooth and powerful
• Compatible both for 2s-3s Lipo/LIHV

Specifications

• Brand Name: Happymodel
• Item Name: Larva-X HD Micro FPV brushless Drone
• Wheelbase: 125mm
• Size: 105mm*105mm*35mm(without propellers)
• Weight: Toothpick style ductless 63g (without battery)
• Whoopick style ducted 79g (without battery)
• Receiver options:
• Frsky SPI receiver
• Flysky SPI receiver
• DSM2/DSMX compatible receiver
• Frsky XM+ receiver
• Frsky R-XSR receiver
• TBS Nano CRSF receiver
• Camera: Caddx Baby Turtle

Motor

• Mode: EX1203 KV6200
• Configu-ration:9N12P
• Stator Diamter:12mm
• Stator Length:3mm
• Shaft Diameter:Φ1.5mm
• Motor Dimension(Dia.*Len):Φ15mm*15mm
• Weight(g):4.7g
• No.of Cells(Lipo):2S-3S

FC

• (Frsky SPI RX version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
• (Flysky SPI RX version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
• (External RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
• MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: MPU-6000(SPI connection)
• Board size: 28.5 * 28.5MM
• Power supply: 2-4S battery input (DC 7-17V)
• Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
• Could add external receiver on the FC board
• Built-in Betaflight OSD(SPI Control)
• Built-in Current meter Max 70A
• Current meter scale set to 470
• Built-in 5V 1A BEC
• Built-in voltage detection

Propellers

• Brand Name:Gemfan
• Blades:2
• Material:PC
• Prop Disk Diameter:65mm
• Center Thickness:5mm
• Center Hole Inner diameter:1.5mm
• Max Prop Width:8mm
• Weight:0.3g
• Colors:black
• Package include 2cw+2ccw propellers

4-in-1 ESC

• MCU upgraded to EFM8BB21
• Power supply: 2-4S LiPo/LiPo HV (7v/17v)
• Current: 10A continuous peak 12A (5 seconds)
• Support BLHeliSuite programmable
• Factory firmware: F_H_40_REV16_7.HEX
• Default protocol: DSHOT600

VTX

• Output power: 25~200mw switchable
• Frequency: 40CH
• Input voltage: 3.3V 5.5V
• Current consumption: 300mA(type)
• Antenna: Micro UXII Antenna
• Frequency: 5.8GHz 5bands 40 channels
• With Race bandSmartaudio ready
• Weight: 3g

Caddx Baby Turtle

• TV system: NTSC/PAL changeable
• Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps
• Power Input: DC 4.5-20V
• Mini Illumination: 0.01lux
• Image Resolution: 2 Megapixels
• Working Current: 380mA@5V/160mA@12V (low consumption)
• OSD Menu: Yes (Support Voltage Display)
• Video Files: MP4
• Audio: Support
• Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
• S/N Ratio: >60dB (AGC OFF)
• Video Output: CVBS
• Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)

Lipo Battery

• Capacity:450mAh
• Voltage:11.4v
• Continuous Discharge Rate: 75C
• Size: 66mmx21mmx18mm
• Weight: 42gConnector: XT30

Video

Includes

• 1 x Larva-X HD frame (with Toothpick style canopy and Whoop style canopy)
• 4 x Whoop duct for Larva-X HD
• 1 x Receiver
• 4 x EX1203 KV6200 brushless Motors
• 4 x Propeller
• 1 x Caddx Baby Turtle
• 1 x VTX 5.8g 25mw~200mw switchable
• 2 x 3S 11.1v 450mah 75c Li-po battery
• 1 x 5.8g Micro UXII antenna