Welcome to GetFPV My Account My Wishlist Log In

Happymodel Larva-X 2-3S Brushless Whoop Micro Drone

Happymodel Larva-X 2-3S Brushless Whoop Micro Drone
The Happymodell Larva-X Micro 2-3S Whoop is a great racing FPV drone! The Larva-X Micro is very powerful, smooth, comes with Smart Audio, Diamond VTX, Runcam Nano 2, and many other cool features and specs that make this whoop a must-have!
Choose option below...
$97.99

* Required Fields

$97.99
Description

The Happymodell Larva-X Micro 2-3S Whoop is a great racing FPV drone! The Larva-X Micro is very powerful, smooth, comes with Smart Audio, Diamond VTX, Runcam Nano 2, and many other cool features and specs that make this whoop a must-have!

Receiver options: Frsky RXSR, DSMX, Crossfire

Note: At this time EMAX cannot provide the Avan Rush propeller; as a result, Happymodel will be sending the LarvaX w/ HQProp T2.5x2.5x3 props or EMAX Avan Rush randomly. 

Features

  • New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible
  • Powerful and smoothly
  • Betaflight OSD support, easy to get RSSI, Voltage, current from your goggles
  • Camera Angle adjustable
  • VTX power switchable 25mw~200mw
  • Smart audio ready, change VTX bands, powers, channels via OSD
  • Receiver option: Frsky RXSR, DSMX, TBS CRSF
  • Diamond VTX Ready
  • Compatible both for 2s-3s Lipo/LIHV

Specifications

  • Brand Name: Happymodel
  • Item Name: Larva X 2-3S 2.5inch Brushless FPV drone
  • Wheelbase: 100mm
  • Size: 88mm*88mm*45mm(without propellers)
  • Weight: 50g(without battery)
  • Recommended Battery (Not Included)
    • 3S 300mah/350mah 2S 450mah 3S 450mah

Motor

  • Mode: EX1103
  • KV options: KV7000
  • Configu-ration:9N12P
  • Stator Diamter:11mm
  • Stator Length:3mm
  • Shaft Diameter: Φ1.5mm
  • Motor Dimension(Dia.*Len):Φ13.5mm*16mm
  • Weight(g):3.7g

FC

  • (Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
  • (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
  • (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 2-4S battery input (DC 7-17V)
  • Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
  • Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
  • No RX version need to add external Receiver
  • Built-in Betaflight OSD(SPI Control)
  • Built-in Current meter Max 70A
  • Current meter scale set to 470
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard 4-in-1 ESC

  • MCU upgraded to EFM8BB21
  • Power supply: 2-4S LiPo/LiPo HV (7v/17v)
  • Current: 10A continuous peak 12A (5 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: F_H_40_REV16_5.HEX
  • Default protocol: DSHOT600

Diamond_VTX

  • Smart audio ready
  • Weight: 3g without antenna
  • Video Output Size: VGA (640×480)
  • Video Output Format: NTSC
  • Record video size: 1280×720 @25FPS
  • TF Card support: Max.32G
  • Interface: JST SH1.0 3pin for Camera
  • JST SH1.0 5pin for Connect with F3/F4 Flight controller
  • Compress Format: AVI

Runcam NANO 2

  • Min. Illumination: 0.01Lux@1.2F
  • D-WDR: Auto
  • Day/Night: Color
  • Power: DC 3-5.5V
  • Current : 110mA@5V 120mA@3.3V
  • Housing Material: ABS
  • Net Weight: 3.2g
  • Dimensions: L14mm*W14mm*H16mm

Video

Includes

  • 1 x Larva-X Frame
  • 4 x 1103 7000KV
  • 4 x 2.5" Props
  • 1 x Runcam Nano 2
  • 1 x 25mw~200mw switchable with 720p DVR 
  • 1 x Propeller Disassemble Tool
  • 1 x Screwdriver
Additional Information
SKU 13543
Manufacturer Happymodel
UPC (GTIN) No
Reviews