Welcome to GetFPV My Account My Wishlist Log In

Happymodel BeecoreX FR V1.0 AIO F4 5-in-1 Brushed Flight Controller /w VTX+RX

More Views

Happymodel BeecoreX FR V1.0 AIO F4 5-in-1 Brushed Flight Controller /w VTX+RX
The BeecoreX FR V1.0 is the ultimate 5-in-1 flight controller for a Brushed Tinywhoop and includes an F4 FC, VTX, ESC, frsky receiver, and betaflight OSD. This makes it very easy to build a brushed tiny whoop! Just add your FPV camera, brushed motors, frame, and propellers... then plug and play - no soldering required.
In Stock
$29.99
OR
Description

The BeecoreX FR V1.0 is the ultimate 5-in-1 flight controller for a Brushed Tinywhoop and includes an F4 FC, VTX, ESC, frsky receiver, and betaflight OSD. This AIO FC makes building a brushed tiny whoop a no-brainer! Just add your FPV camera, brushed motors, frame, and propellers... then plug and play - no soldering required.

Features

  • 5-in-1 F4 FC, VTX, ESC, frsky receiver, and betaflight OSD
  • No soldering required

Specifications

  • R1(RX1) Pad is used for IBUS/DSM2/DSMX signal input
  • IR1(IRX1) Pad is used for SBUS signal input (Already inverted)
  • R1 and IR1 Cannot be used simultaneously
  • Mounting Pattern: 25.5x25.5mm

Flight Controller

  • (Frsky SPI RX version) Betaflight Firmware target: CrazybeeF4FR
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Brushed 4in1 ESC
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G VTX 25mw~100mw switchable
  • Built-in SPI Frsky receiver(compatible with Frsky_D/ Frsky_X/ S-FHSS/ Redpine protocol)
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard Frsky SPI - Receiver Version

  • SPI BUS receiver Frsky version
  • Compatible with Frsky D8/D16 ( D8 is recommended), S-FHSS, Redpine protocol
  • Channels: 8ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
  • RSSI compatible

Onboard 5.8g VTX

  • Output power: 25mw~100mw switchable
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Frequency: 5.8GHz 5bands 40 channels
  • With Race band
  • Smart audio ready
  • VTX POWER=1 (25mw)
  • VTX POWER=2(50mw)
  • VTX POWER=3(100mw)
  • Recommend to use 50mw
  • Recommend Runcam Nano3 camera, plug and play

Includes

  • 1x Happymodel BeecoreX Fr V1.0 AIO F4 5-in-1 Brushed Flight Controller /w VTX+RX
  • 2x Connecting Wires
  • 4x Damping Balls
  • 5x Screws
Additional Information
SKU 15791
Manufacturer Happymodel
UPC (GTIN) 736952009340
Reviews