GEPRC is happy with their new release of the TinyGO, which comes in a ready-to-fly whoop kit! GEPRC has worked so hard to create a lightweight whoop that is suitable for indoor flying, has max performance, and with their 4K version, one can record video up to 4K 60fps.

The TinyGO Whoop RTF Kit is very light, so you don't need to worry about carrying heavy equipment. The whoop kits come with a high-definition 800x480px FPV goggle and the latest GEPRC GR8 Remote Controller. It also supports 8 channels, the charger uses Type-C interference (can use its own charger to charge), is very stable, and you can expect to get a flying time of 6 minutes or more.

Suitable for beginners, as well as pro pilots, the TiniGO is the best choice for a great start to the world of FPV!

Note: Due to shipping restrictions, batteries are no longer included.

Video

Features

• TinyGO is very suitable for indoor flight, More than 6 minutes of flight time
• Using GEPRC-12A-F4 FC system, reliable and stable
• No Propellers in view, Anti-jamming VTX, NO Jello flight Footage, stable flight picture
• The Newly Developed GR8 Remote Controller is specially designed for Novice and indoor flight
• High-Quality FPV Goggle, High definition 800 * 480px, sensitive 5.8G receiver
• Ready To Fly Kit, Including a GEPRC Fashion Fly bag, Portable and Lightweight
• There are two versions: The normal version is suitable for daily practice, The 4K version can Record 4K 60fps Video

Specifications

• Camera: Caddx baby turtle V2
• Image sensor: 1/2.7″ CMOS sensor
• Horizontal: 800TVL
• TV system: NTSC/PAL changeable
• Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps
• Power Input: DC 4.5-20V
• FPV FOV: 155°
• Recording FOV: 170°
• Mini Illumination: 0.01lux
• Image Resolution: 2 Megapixels
• Lens: 1.8mm Turbo Eye Lens
• Working Current: 380mA@5V/160mA@12V (low consumption)
• OSD Menu: Yes (Support Voltage Display)
• Video Files: MP4
• Audio: Support
• Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
• S/N Ratio: >60dB (AGC OFF)
• Video Output: CVBS
• Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)

Configuration

• Name: TinyGO
• Brand: GEPRC
• Frame: GEP-TG16
• Motor to Motor: 79mm
• FC: GEP-12A-F4
• MCU: STM32F411
• IMU: MPU6000(SPI)
• OSD: BetaFlight OSD w/ AT7456E chip
• ESC: BLheli_S 12A
• VTX: 5.8G 25~200mW VTX
• Camera: Caddx Loris 4K 60fps
• Propeller: GEMFAN 1636*4 (4 pairs)
• Motors: GR1102 10000Kv
• TinyGO 4K Weight: 54.8 Grams

Remote Controller

• GEPRC GR8 Remote Controller
• Radio Frequency: 2.4GHz
• Radio Protocol: FHSS
• Channel: 8
• Transmit Power: < 20 dBm
• Antenna: In-built dual Antenna
• Low Voltage Alarm: <4.8v
• Batteries: 2x 18650 Batteries

Receiver

• Channel: 8
• Voltage: 5V
• Radio Frequency: 2.4GHz
• Radio Protocol: FHSS
• Range: 300 meter

FPV Goggle

• Resolution: 800*480px
• Size of Screen: 4.3 inch
• Whole Size: 155mmx144mmx113mm
• In-built batteries: 3.7v/2000mAh
• Working Hours: 2.5 Hours
• Weight: 314.6 Grams

Charger

• Input power: 5v （USB & Type C）
• Full charged Voltage: 4.35v
• Output current: 500mAh
• Charging: It can charge 4 PCS 1s HV lipo 4.35v HP2.0 plug batteries at the same time

Recommended Batteries

• Batteries Capacity: 530mAh
• Voltage: 4.35v 1S1P
• Discharge rate: 90C
• Size:（61mmx16.7mmx7mm）
• Weight: 12.7 Grams
• Interface: PH2.0

Note: Due to shipping restrictions, batteries are no longer included.

Includes

• 1 x TinyGO TinyWhoop
• 1 x GEPRC GR8 Transmitter
• 1 x GEPRC FPV RG1 Goggle
• 1 x GEPRC 1S LiHV 4.35v Charger
• 1 x Battery strap
• 4 x Gemfan 1636*4 Props(pairs)
• 1 x GEPRC Fly bag
• 1 x Screwdriver