GEPRC SPAN V2 HD Stack - F722 SPAN Bluetooth FC + 50A 3-6S BLHeli_32 96K ESC

The GEPRC SPAN V2 HD Stack - F722 SPAN Bluetooth FC + 50A 3-6S BLHeli_32 96K ESC is specifically designed for DJI Air Unit, plug and play. This stack is a flight tower system with F722 chip flight controller and BLheli_32 50A 96K 4 in 1 32-bit ESC, equipped with 42688 -P gyroscope, integrated 512MB on-board SD card and on-board Bluetooth parameter tuning. So as to have a more delicate flying experience. The F722 SPAN Bluetooth FC supports direct plug-in the DJI Air Unit, which can save the trouble of soldering. The upgrade of the type-C USB connector greatly improves the life of the socket and reduces the risk of poor contact. The F722 SPAN Bluetooth FC can be well matched with BLheli_32 50A 96K 4-in-1 32-bit ESC. The flight controller supports various receivers, including Sbus, PPM, CRSF, DSMX, iBus, DUMD and other protocols, so don't worry that the remote controller in your hand cannot be used.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• Simple and reasonable installation method, shock absorption ring can make the gyroscope work stably
• Combined with BLHeli_32 50A 96K 4IN1 ESC to achieve silky smooth flight experience
• Support major receivers: Sbus, PPM, CRSF, DSMX, iBus
• Using mainstream STM32F722RET6 main control
• Equipped with the latest 42688-P gyroscope
• Support Bluetooth parameter tuning
• Upgraded type-C USB connector
• Direct plugging into DJI Air Unit
• 512MB on-board SD card
• Integrated LC filtering

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

F722 SPAN Bluetooth FC

• Size: 36x36mm, 44mm hole becomes 43mm after using silicone grommets
• OSD: BetaFlight OSD w/ AT7456E chip
• Black Box: 512MB onboard SD card
• Firmware: GEPRCF722-BT-HD
• BEC Output: 5V 3A/12V 3A
• MCU: STM32F722RET6
• USB Connector: Type-C
• Input Voltage: LiPo 3-65
• Integrated LC filtering
• IMU: 42688-P(SPI)
• UARTS: 5

50A 3-6S BLHeli_32 96K ESC

• Supported Protocols: DSHOT600, PWM, Multishot, OneShot
• Firmware: GEPRC_G071_4IN1_96K
• MCU: SMT32G071 (32bit 96K Hz)
• Peak Current: 55A (5 seconds)
• Continuous Current: 50A
• Input Voltage: 3-65 Lipo
• Galvanometer: Support
• Telemetry: Support

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Propellers: HQProp 8X5 2-Blade Polycarbonate Propellers (Set of 4) - Light Gray")

•   (Insert links such as manuals, firmware, etc)

• 1x Flight Controller Adapter Cable
• 1x DJI Air Unit Adapter Cable
• 4x Silicone grommets
• 1x XT60 Power cable
• 1x Flight Controller
• 4x M3*24 Screws
• 4x M3*30 Screws
• 8x Nylon nuts
• 1x Capacitor
• 1x ESC

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS