The SPAN F722 VTX FC Stack by GEPRC comes with a F722 DUAL GYRO ICM20689 Flight Controller, 5.8GHz 600W VTX, and BL32 50A 4-in-1 ESC. The FC supports a variety of receivers including Sbus, PPM, CRSF, DSMX and iBus protocols, which can be used with your remote control. Powerful stack all in one!

Specifications

F722 DUAL ICM20689 Flight Controller

• MCU: STM32F722RET6
• IMU: 2x ICM20689(SPI)
• BlackBox: 32Mb onboard Flash
• OSD: BetaFlight OSD w/ AT7456E chip
• Baro：NO
• BEC Output: 5V@2A
• Integrated LC Filter
• Firmware target: EXF722DUAL
• Size: 36x36mm board, φ4mm with Grommets φ3mm
• Power input: 3-6S LiPo

5.8G 600mW VTX

• Channel: 48
• Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 600mW
• Connector type: MMCX Connector
• Traditional button
• IRC Tramp protocol

BL32 50A ESC 4-in-1

• MCU: STM32FO51K86(32bit 48mHz)
• Continuous Current: 50A
• Peak Current: 55A (5S)
• Current sensor: YES
• Telemetry：Supported
• Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
• Firmware Version:GEPRC-BL32-4IN1
• Input Voltage: 3-6S Lipo

BLHeliSuite download

Manual

Includes

• 1 x FC & VTX board
• 1 x 50A ESC board
• 1 x MMCX Antenna Extension Cord Wire
• 1 x 5.8G Antenna
• 1 x 8pin cable
• 4 x 4pins JST-SH sockets
• 1 x 35v 220uf Capacitor
• 1 x XT60 Power cable
• 12 x Silicon grommets M4 to M3
• 4 x M3*25 YFS screw
• 4 x M3*30 YFS screw
• 8 x M3 Nylon nut