From progression to evolution, there's a comprehensive reconstruction of the previous generation of design leading up to the unveiling of Cinelog25 V2. This upgraded version introduces three distinct video transmission options, with the O3 Air Unit video transmission version standing out as the most significant. Leveraging the O3 Air Unit's inherent anti-shake capabilities against fuselage shock, Cinelog25 V2 achieves remarkable stability by utilizing compatible camera damping balls.

Its redesign incorporates aluminum parts and cable ties for secure battery placement, ensuring convenient replacement when needed. Powered by the new TAKER G4 35A AIO with 1404 4500KV motors and HQ DT63mmX4 propellers, the flight performance reaches new heights. Additionally, the inclusion of propeller guards enhances safety by effectively mitigating the risk of injury from flight mishaps.

Cinelog25 V2 emerges as a 2.5-inch high-definition FPV system seamlessly blending indoor and outdoor flying experiences. Crafted by the GEPRC team, its flight dynamics exude finesse, promising an exceptional user experience.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: Finally! The GEPRC Cinelog 25 V2 has arrived! Review

• The O3 camera design is independently attached to the shock-absorbing gimbal to solve camera IMU resonance problems and achieve the best video anti-shake effect
• The fuselage is small and compact, suitable for indoor and outdoor use. Mounting a Naked GoPro8 enables the shooting of beautiful videos
• Use the new TAKER G4 35A AIO, which has better computing power. ESC's over-current protection makes it stable and reliable
• Add the O3 Air Unit image transmission version, ultralight weight within 250g, fitting with FAA flight standards
• Designed with aluminum parts and cable ties to facilitate the change of batteries
• Design a propeller guard to prevent people from making flight mistakes

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Recommended battery: LiPo 4S 660mAh-850mAh
• Receiver: PNP / GEPRC ELRS24 / TBS Nano RX
• Cinelog25 V2 Analog ELRS24 weight: 148g±5g
• Model: Cinelog25 V2 WASP Quadcopter
• Antenna: GEPRC Peano 5.8G RHCP UFL
• OSD: Betaflight OSD w/AT7456E
• Propeller: HQProp DT63mm*4
• FC system: TAKER G4 35A AIO
• Motor: SPEEDX 1404 4500KV
• Camera: Runcam Link Wasp
• MCU: STM32G473CEU6
• Flight time: 4′00″ - 6′00″
• Frame: GEP-CL25 V2
• Bottom plate: 2.0mm
• Gimbal plate: 2.0mm
• Wheelbase: 114mm
• VTX: Runcam Link
• Top plate: 2.5mm
• ESC: 8Bit 35A

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x Cinelog25 HD WASP Quadcopter
• 1x L-shaped screwdriver 1.5MM
• 2x HQProp DT63mm*4 (2 pairs)
• 1x Battery strap M15x200mm
• 1x Battery strap M15x150mm
• 1x Naked Camera GP8 base
• 1x T-type Antenna mount
• 2x Battery Silicone Pads
• 1x Set of screws
• 1x Keychain

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS