The new GEPRC Cinelog 20 2" Frame Kit can be shuttled in a narrow space, and can be adapted to O3 VTX, and can also shoot shocking effects in a narrow space. The resigned camera gimbal can easily eliminate high-frequency vibration and jello issues. Soft connection damping design of the camera gimbal and can also be mounted with a naked GoPro base, which supports the installation of Naked GoPro 8/910/11, Insta360 Go2 and DJI Action2 cameras. The flight controller mounting hole spacing is 25.5mm*25.5mm, which is compatible with various VTX holes on the market with 20mm*20mm/25.5mm*25.5mm. The 9mm * 9mm motor mounting hole is used to install larger 12-13 series motors, and the compact body makes the flight more confident.

Note: (Insert any product options here in black text with options in bold.)

Example: "Choose from two KV's: 1800KV (4S) or 2500KV (6S)."

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in bold.)

• Supports the installation of Naked GoPro 8/910/11, Insta360 Go2 and DJI Action2 cameras
• Camera gimbal can easily eliminate high-frequency vibration and jello issues
• Design the outer EVA damping ring to effectively reduce the impact force
• Flight controller mounting hole spacing is 25.5mm*25.5mm
• Combining aesthetics and engineering for compact design
• Soft connection damping design of the camera gimbal
• Shoots shocking effects in a narrow space
• Can be shuttled in a narrow space
• Can be adapted to O3 VTX

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

• Flight controller: GEP-F4-35A AIO (mounting holes: 25.5mm×25.5mm)
• VTX mounting holes: 20mm x 20mm /25.5mm x 25.5mm
• Motor: 1303.5 (mounting holes: 9mm×9mm)
• Suitable propeller size: 2 inch propeller
• FC mounting holes: 25.5mm x 25.5mm
• Camera gimbal triangle plate : 1.5mm
• Motor mounting holes: 9mm x9mm
• Recomended Battery: 4S 660mAh
• Camera gimbal plate: 2.0mm
• FPV camera spacing: 20mm
• Motor plate gasket: 2.0mm
• Bottom plate: 1.5mm
• Wheelbase: 100mm
• Main plate: 2.5mm
• Propeller: 2 inch
• Weight: 53.4g
• ESC: 35A

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won't need to set up another receiver. If you don't have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

PLATES

• 1 x Camera gimbal triangle plate: 1.5mm
• 1 x Camera gimbal plate: 2.0mm 
• 1 x Motor plate gasket: 2.0mm
• 1 x Bottom plate: 1.5mm

HARDWARE

• 1 x Single-ended bright-edge aluminum column M2*3.5*28
• 1 x Single-ended bright-edge aluminum column M2*3.5*25
• 4 x M2*1.9-OD4.9 self-clinching nut-brass color M2
• 4 x Camera gimbal shock absorbing rubber ring
• 5 x Camera gimbal vibration dampening rubber
• 1 x 7075 Aluminum Column M2*3.5*28
• 1 x 7075 Aluminum Column M2*3.5*25
• 2 x Round head screw with pad M2*8
• 6 x Round head screw M2*4 X6
• 10 x Round head screw M2*12
• 4 x Round head screw M2*16
• 18 x Round head screw M2*7
• 18 x Round head screw M2*8
• 4 x Round head screw M2*5
• 4 x Half-round head M1.6*8
• 4 x Nylon column M2*5mm
• 10 x Self-clinching nut M2
• 4 x BEC silicone gasket
• 10 x Nylon nut M2

3D PRINTED PARTS

• 1 x VTX Antenna mount(small hole)
• 1 x VTX Antenna mount (big hole)
• 1 x Camera mount (2 holes) 
• 1 x Camera mount (1 hole)
• 1 x TBS Antenna mount
• 1 x Receiver mount
• 1 x Receiver mount

INJECTION MOLDED PARTS

• 4 x Propeller guard

ACCESSORIES

• 1 x 4S Naked GoPro power cable (with balanced terminal head)
• 2 x Receiver antenna tubes 100mm
• 1 x L-shaped screwdriver 1.5MM
• 2 x 3M double-sided tape
• 1 x Naked GoPro 8 base
• 2 x Battery anti-slip pad
• 2 x Battery tie M15*150
• 4 x EVA damping ring
• 2 x Damping pad
• 1 x Keychain

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS