Walksnail Avatar VRX Bundle - HD Kit V2 32GB + Gyro

This Walksnail Avatar VRX Bundle features built-in 32GB storage and Gyroflow support. The 2K/120fps/4:3 native sensor camera allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency. Other features include an updated PCB board, an updated outer shell, low latency of 22ms, and a 4Km range.

The Walksnail Avatar VRX transmits 1080P/60fps with industry-leading H.265 encoding technology, which can provide a minimum delay of 22ms and a maximum resolution of 1080p. Enjoy clear HD video to take your FPV experience to the next level!

VIDEO: Walksnail Avatar HD VRX + Avatar HD Kit V2

• Walsknail Avatar HD VRX + Walksnail Avatar HD Kit V2 - 32GB with Gyro
• Optimized antenna base design and frequency button position
• The only native 4:3 high-definition sensor in the FPV industry
• Updated the design of the PCB board and outer shell
• The spare pad provides two power connection modes
• Max transmission distance of more than 4km
• Supports 1080P 60FPS or 720P 100FPS
• 2K pixel, 120fps, 4:3 native sensor
• Supports Betaflight Canvas Mode
• Compatible with Analog Goggles
• 20*20mm mounting holes
• Lightweight Design - 83g
• 1080P 120fps HD FPV
• 160° wide-angle FOV
• F/2.0 Large Aperture
• 32g built-in storage
• Supports Gyroflow
• Lightweight design
• GPS anti-jamming
• 22ms low latency
• Ranging Mode
• 4KM range
• HDMI Out
• 6V-25.2V

Lightweight design, ultra-thin experience
Walksnail VRX is only 83g and comes with 114*55*22mm size, easy to carry.

1080P/60FPS
Walksnail VRX adopts industry-leading H.265 encoding technology,
which can provide a minimum delay of 22ms and a maximum resolution of 1080p.
The HD picture quality takes you to experience the fun of flying a drone.

HDMI output ensures you enjoy uncompressed audio and video signals from the Walksnail HD system.

Canvas Mode
Supports betaflight full OSD display, supports betaflight, inav, kiss full osd display
you can easily adjust the parameters you want by remote control.

AVATAR HD VRX

• TransmitterPower(EIRP): FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBm
• I/O Interface: HDMI,microSD card slot, DC5.5*2.1mm
• HDMI output: 1080p60fps,720p100fps,720p60fps
• Communication Frequency: 5.725-5.850GHz
• Power Input: 7-21V(2S-5S)
• System: AvatarHDsystem
• SDCard: Support256G

• Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; 
• Gyroflow: supported/ non-supported, two version
• Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
• Min.Illumination: 0.001Lux
• Dimensions: 19*19*22mm
• Coaxial Cable: 140mm
• Shutter Rolling shutter
• Ratio: 4:3 native /16:9
• Aperture: F2.0
• Lens: 2.1mm
• Weight: 7.2g
• FOV: 160°

AVATAR V2 VTX

• Transmitter Power (EIRP: FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
• Supported FC System: Betaflight; Inav; Fettec; ArduPilot;Kiss
• 1/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
• Communication Frequency: 5.725-5.850GHz
• Mounting Holes: 25.5*25.5mm; 20*20mm
• Operating Temperature: -20-40℃
• Dimensions: 33.5*33.5*10.5mm
• Latency: Average delay 22ms
• Wide Power Input: 6V-25.2V
• Model: Avatar V2 module
• Recording: 1080p/720p
• OSD: Canvas mode
• Antenna: 1(IPEX)
• Storage: 8G/32G
• Weight: 17.6g
• Channels: 8

AVATAR V2 ANTENNA

• Frequency range: 5600MHz-6000MHz
• Size: R15 X 45mm(without cable)
• Input Impedance: 50Ω
• Polarization: LHCP
• Interface: IPEX-1
• Gain: 1.9dBi
• VSWR: ≤1.5
• Weight: 2g

• 1x Walksnail Avatar HD VTX V2 - 32G w/ Gyro
• 1x Walksnail Avatar HD Camera V2
• 1x Walksnail Avatar Antenna V2
• 1x USB transfer extension cable
• 2x HD Stubby Antennas (LHCP)
• 1x Walksnail Avatar VRX
• 1x 2in1DCPowerCable
• 1x 4 Pin silicone cable
• 2x RedBird Antenna
• 1x Hardware Kit
• 1x HDMI Cable