Walksnail Avatar HD VTX Module V2 - 32GB

This Walksnail Avatar HD VTX Module V2 features built-in 32GB storage with Gyroflow support. The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency. Other features include an updated PCB board, an updated outer shell, low latency of 22ms, and a 4Km range.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: Walksnail Avatar HD Pro Kit + Avatar HD Kit

• The spare pad provides two power connection modes
• Updated the design of the PCB board and outer shell
• The frequency binding button position changed
• Optimized antenna placement to protect VTX
• 25x25mm / 20x20mm mounting holes
• 1080P 120fps HD FPV
• 32GB built-in storage
• Lightweight design
• GPS anti-jamming
• Gyroflow support
• 22ms low latency
• Ranging Mode
• 4KM range
• 6V-25.2V

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Transmitter Power (EIRP: FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
• Supported FC System: Betaflight; Inav; Fettec; ArduPilot;Kiss
• 1/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
• Communication Frequency: 5.725-5.850GHz
• Mounting Holes: 25.5*25.5mm; 20*20mm
• Operating Temperature: -20-40℃
• Dimensions: 33.5*33.5*10.5mm
• Latency: Average delay 22ms
• Wide Power Input: 6V-25.2V
• Model: Avatar V2 module
• Recording: 1080p/720p
• OSD: Canvas mode
• Antenna: 1(IPEX)
• Weight: 17.6g
• Storage: 32GB
• Channels: 8

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x Walksnail Avatar HD VTX V2 w/ 32GB + Gyro
• 1x USB transfer extension cable
• 4x M2*5*0.5mm gasket
• 1x 4 Pin silicone cable
• 4x M2*14mm screws
• 1x Spare Power Pad
• 8x M2*4mm screws
• 4x M2*5mm screws
• 4x M2*6mm screws

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS