HEX Herelink HD Air Unit V1.1
HEX Herelink HD Air Unit V1.1
In Stock
About this product
The Herelink Air Unit 1.1 Integrates a data link unit, remote control link, and video display unit into a single device, making a complex device system integrated and miniaturized. This VTX unit features a signal transmission range up to 20KM, minimum latency of 110ms, two HDMI inputs, and supports 720p 30fps, 1080p 30fps / 60fps video format.
V1.1 CHANGELOG
- Ethernet port added
- SD card slot added
Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)
VIDEO: (Insert Video Title here in Bold)
Features
- Data Link, Remote Control Link, and Video Display
- PineSync Technology based on S1 Processor
- CubePilot Hex Technology
- 4W Power Consumption
- MMCX antenna jacks
- 7-12V Power Input
- Indicator lights
- ETH Interface
- Micro USB
- SD Slot
USE BULLETED FEATURE HERE INÂ BOLD CAPS.
Add additional feature descriptions here to describe the above.
USE BULLETED FEATURE HERE INÂ BOLD CAPS.
Add additional feature descriptions here to describe the above.
Specifications
- Micro USB: Used for debugging and upgrading, support OTG mode**（no need for external power for USB device）**
- Power Input: Recommended supply voltage ~7V: minimum 6V, maximum 12V, and avoid sharing BEC with servos
- MMCX antenna jack 1, 2: Used for signal transmission and ground communication
- ETH Interface（only supported by Air unit 1.1: Network protocol device access
- Indicator light 1，2: Used to indicate state for pairing and video transmission
- Power Consumption: The average power consumption does not exceed 4W
- Manufacturer: HEXAERO PTE LTD. / HEX TECHNOLOGY LIMITED
- SD Slot（only supported by Air unit 1.1: For future usage
- Micro HDMI 1: Camera video signal input (Recommend)
- S.bus Interface: Dual RCout, S.bus1, and S.bus2
- Micro HDMI 2: Camera video signal input
- Button: Used for pairing and state reset
- Signal Bandwidth 20MHz / 10MHz
- Model: Herelink Air Unit 1.1
- UART Interface: 3.3V UART
- FCC ID: 2A596-HX406210
- Size: 78.5×30×15mm
- Voltage Rating: 7-12V
- IC: 28413-HX406210
- SKU: HX4-06210
- Weight: 98g
IMPORTANT NOTES
- Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."
Recommended (Not Included)
- Â (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")
Includes
- 1x Herelink HD Air Unit V1.1
- 1x Herelink Silicone Ring Set
- 2x Herelink Taoglas Antenna
- 1x Herelink Set up tips card
- 1x Herelink Mounting Plate
- 1x Herelink HDMI Cable
- 1x Herelink Screw Set
- 1x Herelink Cable Set
- 1x Herelink Fan
Featured Videos
ADD VIDEO TITLE HERE IN BOLD CAPS
ADD VIDEO TITLE HERE IN BOLD CAPS
FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
More Information
| SKU | 19013 |
|---|---|
| UPC (GTIN) | 764613347814 |
| Manufacturer | Hex Technology |
| NDAA Compliant | No |
| Mounting Pattern | N/A |
| Frequencies | 2.4GHz |
| Item Returns | This item can be returned |