Welcome to GetFPV My Account My Wishlist Log In

FPV Rock Crawler w/ DJI HD FPV System

FPV Rock Crawler w/ DJI HD FPV System

It might not be a Tesla Cybertruck, but it's just as cool! The HD FPV Rock Crawler uses DJI's latest HD FPV system to give you the ultimate R/C truck experience! Explore nature in a new way! Whether it's your backyard or your backwoods!

Out of Stock

We all have some kid in us, some more than others. All we know is that anyone who tries driving the FPV Rock Crawler will have a blast, kid or adult! Honestly, this thing is so much fun, when we were building these and driving them around our building, you couldn't take the controller away!

The DJI HD FPV experience is unique in that you can truly take in the environment and explore the world around you without all the worry and attention needed when flying a drone. The HD feed from the DJI system will give you an amazing view from inside the driver's seat of the Rock Crawler. Plus, the FPV camera is installed onto a servo, allowing you to pan left and right to see what's around you as your drive! The DJI system also expertly reduces all the jitter and breakup that other fpv systems might bring when placed on an RC ground vehicle.

The FPV Rock Crawler has been hooked up with a TBS Crossfire Nano Receiver. This allows you to control it all with a traditional radio setup though the Crossfire, not needing to use the DJI Radio or flight controller.

The Rock Crawler itself has independent suspension and can easily clear curbs and other small obstacles. It is made of sturdy aluminum and is made to take abuse.

Our engineers have been working on these crawlers as a fun side-project for a while now, and we want you to have a chance with them too! They are just too much fun!

Need the DJI Goggles too? Check out our full Rock Crawler bundle! Includes everything you need to get crawling!

Note: You will need a radio with Crossfire to use this Rock Crawler. Read below.

What's Inside the Rock Crawler?

  • 1 x DJI Air Unit (Camera + Module)
  • 1 x TBS Crossfire  Nano Rx
  • 2 x XILO AXII Long Range Antenna

3D Printed Parts

What Else Do I Need?

  1. 3S Battery (3000-3500mAh)
  2. Radio Controller (We recommend the Taranis Q X7 to keep it simple and keep costs down. (feel free to use a different one if you know how to connect it all yourself)
  3. TBS Crossfire Micro TX

Quick Guide

Additional Information
SKU 11574
Manufacturer GetFPV Affiliate
UPC (GTIN) 032733835420