Mr Steele ApexLR EVO 7" HD Quadcopter RTF w/ DJI O3 - 4S Bundle
As low as $989.99
Select options for stock status
About this product
Get ready to push your long-range FPV drone flying to new heights with the ImpulseRC ApexLR EVO 7" FPV RTF - Mr. Steele Version. This impressive drone is built and tested here at GetFPV and features advanced HD video system isolation, ensuring crystal-clear footage even on high-speed flights. You'll capture stunning visuals from every angle with an aluminum camera mount and custom GoPro mounting options. Mr. Steele's additions, including antenna mounting, rubber FC vibration mounts, skids, and more, guarantee optimal performance and durability for an unparalleled flying experience.
- Each Mr Steele HD 7" 4S Quadcopter RTF is hand-built, tuned, and test-flown in the USA.
- Endorsed by Mr. Steele himself, preloaded with approved tune and settings.
Mr. Steele is an FPV hobby enthusiast who has been flying FPV drones since April 2014. As a result of his massive flying skills, knowledge of FPV, and "mustache" personality, he has been named one of the best in the game! Due to a high reach on social media and popularity, Mr Steele has become one of the world's first full-time professional FPV freestyle pilots. Nonetheless, Mr Steele has worked with ESPN, CNN, BMW, GoPro, RedBull, and other well-known companies!
Note: Some items in your bundle may not be in stock at the time of purchase. Be sure to check the shopping cart to see the stock status of each item. Your order will ship once all items are in stock. We suggest placing a separate order for back-ordered items so your in-stock order can immediately ship.
VIDEO: ApexLR 7" NEW FPV Frame
Features
- Die-Cut Mylar Insulator and Custom Machined Cone Rivets
- MATEK GNSS SAM-M10Q GPS for Long-Range Flights
- Ethix Konasty Moon Boot V2 2507 2200KV Motors
- Mr. Steele ImpulseRC ApexLR EVO 7" Frame
- TBS Crossfire Diversity Nano RX
- HD Video System Isolation
- Aluminum Camera Mount
- Custom GoPro Mounting
- DJI O3 FPV System
- Mr. Steele Additions
- Antenna Mounting
- Tension Braces
DJI O3 AIR UNIT
The DJI O3 Air Unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a light, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity, and enjoy even more sky-high travels!
DJI HD CAMERA ISOLATION
Like the Caddx Vista itself, certain DJI HD cameras can also ground the frame, with similar unfortunate consequences. Included with the Apex EVO are newly redesigned HD camera plates and 3D-printed insulation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame.
CUSTOM GOPRO MOUNTING
Not many mounts can beat the standard GoPro tab and slot design for quick angle changes while filming. However, the stock GoPro bolt leaves a lot to be desired for FPV use. Included with the Mr Steele version of the Apex EVO is a 3D printed mount and a new custom-designed bolt, specifically for FPV use. Our new bolt is machined from aluminum for substantial weight savings and has an 8mm hex on the outside and an internal 2.5mm hex broach. Make quick changes to your GoPro angle using either the standard hex driver for M3 bolts or the prop tool for M5 nuts, which you already have in your flight bag.
Specifications
- Model: Mr Steele ApexLR EVO 7" HD Quadcopter RTF w/ DJI O3 HD FPV System - 4S
- Frame: ImpulseRC ApexLR EVO 7in FPV Frame Kit - Mr. Steele Edition
- FC: MATEKSYS F722 Flight Controller for DJI Digital System
- ESC: Lumenier Razor LED 55A 4in1 F3 BlHeli_32 2-6s ESC
- Antenna:
- TBS Crossfire Immortal T Antenna V2 Extended
- TBS Crossfire Immortal T Antenna V2 Extra Extended
- Motors: Ethix Konasty Moon Boot V2 2507 2200KV Motor
- Propellers: HQProp DP 7x3.5x3 V1S PC Propeller
- Receiver: TBS Crossfire Diversity Nano RX
- GPS: MATEK GNSS SAM-M10Q
- VTX/Camera: DJI O3 Air Unit
- Arm Thickness: 5.5mm
- Weight: 520g AUW
- Arm Size: 7"
IMPORTANT NOTES
- Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."
Recommended Bundle Options (Not Included)
- Radio Controller (for TBS version): TBS Tango 2 PRO FPV RC Radio Controller or TBS Tango 2 FPV RC Radio Controller
- Propellers: HQProp DP 7X3.5X3 PC Propeller (Set of 4 - Smoke Grey)
- Battery: Lumenier NAV 3000mAh 4S Lithium-Ion Battery - XT60
- Goggles: DJI Goggles 2
Links
- (Insert links such as manuals, firmware, etc)
Includes
- 1x Mr Steele ApexLR EVO 7" HD Quadcopter RTF w/ DJI O3 - 4S - TBS Crossfire
- 1x HQProp DP 7x3.5x3 V1S PC Propeller - Smoke Grey (Set of 4)
- 1x Lumenier Zipper Case
Compatibility Chart
Featured Videos
Mr. Steele - 7” drone that RIPs! | Apex EVO LR | FPV
ADD VIDEO TITLE HERE IN BOLD CAPS
More Information
| SKU | 21525 |
|---|---|
| UPC (GTIN) | 724376357949 |
| Country of Manufacture | United States |
| NDAA Compliant | No |