Beginner DIY FPV Drone Bundle - QAV-S 2 Bardwell SE 5” + DJI Goggles 3 + DJI O3 Air Unit

Beginner DIY FPV Drone Bundle - QAV-S 2 Bardwell SE 5” + DJI Goggles 3 + DJI O3 Air Unit

As low as $827.99 Regular Price $1,027.99

Select options for stock status

Only left for same day shipping. Order now!
Beginner DIY FPV Drone Bundle - QAV-S 2 Bardwell SE 5” + DJI Goggles 3 + DJI O3 Air Unit
This Bundle features the Beginner DIY Drone Kit - QAV-S 2 Joshua Bardwell SE 5” (HD Ready), DJI Goggles 2, and the DJI O3 Air Unit. 

Customize Beginner DIY FPV Drone Bundle - QAV-S 2 Bardwell SE 5” + DJI Goggles 3 + DJI O3 Air Unit

Beginner DIY FPV Drone Kit - QAV-S 2 Joshua Bardwell SE 5” - HD Ready   + $299.99
Back Ordered
DJI O3 Air Unit   + $179.00
In Stock

Your Customization

Beginner DIY FPV Drone Bundle - QAV-S 2 Bardwell SE 5” + DJI Goggles 3 + DJI O3 Air Unit

Summary

About this product

This Bundle features the Beginner DIY Drone Kit - QAV-S 2 Joshua Bardwell SE 5” (HD Ready), DJI Goggles 2, and the DJI O3 Air Unit. 

The Beginner DIY Drone Kit - QAV-S 2 Joshua Bardwell SE 5” - HD Ready is the ultimate bundle with the components necessary to build a beginner FPV drone. This HD Ready kit is compatible with the DJI O3 or Walksnail systems. The FPV system is not included, which allows you to add your own, which can be purchased separately. Whether you've built hundreds of quads or this is your first build, this DIY kit is the simplest way to build an FPV drone from scratch.  Joshua Bardwell, Lumenier, and Xilo have partnered up and compiled a list of all the components with an easy-to-follow step-by-step build guide to assemble, build, tune, and fly this revolutionary QAV-S 2 drone. 

Note: A receiver that is compatible with your controller is required, please see the options under "Recommended". This is a Full DIY Build Kit with assembly required.

Note: The Controller 2 only works with Goggles 2 and Goggles Integra. The Controller 3 only works with Goggles 3. 

VIDEO: Unlock the Thrills: Build Your First FPV Drone Today! Ultimate Beginner Guide!

Watch the entire DIY Build Series here.

Bardwell QAV-S 2 DIY Kit Features

  • This drone kit is designed for Freestyle FPV and can carry an HD action camera for epic footage
  • Upgraded 5" QAV-S 2 Frame with X-Lock Arm Mechanism and Aluminum FPV Camera Plates
  • Powerful Xilo Stax V2 45A BLHeli_32 ESC (3-6s) with Current Sensor and Telemetry
  • Xilo Stax V2 F4 Flight Controller with the latest BetaFlight firmware compatibility
  • Includes full step-by-step build guide series by FPV expert Joshua Bardwell
  • Frame made of High-Quality Lumenier carbon fiber material and hardware
  • DJI O3 or Walksnail compatible (FPV system sold separately)
  • DIY Kit has the components needed to build the FPV drone
  • Powerful and smooth Stealth 2207 6S 1800KV motors 

What's New?

This HD Ready DIY Kit has been developed and designed with the addition of the long-awaited QAV-S 2 frame! Lumenier and Xilo have been working side by side with Joshua Bardwell on multiple features to make this kit even better than the last:

  • New Airframe Design: The QAV-S 2 - Joshua Bardwell Edition frame optimizes the space and weight for a 5” quad design, with a low profile body for electronics, enough space to fit an Analog or Digital Video System, engineered center of gravity when carrying an Action Camera, and strong and structured design that is meant for hardcore freestyle.
  • X-Lock Arm Mechanism: The Lumenier QAV-S 2 Bardwell SE introduces a new lateral X-Lock arm system! This all-aluminum arm locking system improves on the QAV-S design in both rigidity and ease of use, providing two-axis clamping that is mechanically isolated from the main plates and flight controller stack. The new lock system also allows the arms to fold with only one screw for easy transportation. 
  • O3, Vista, and Walksnail Compatible Mounting: The rear plate adds 25.5 M1.6 mount holes to allow direct mounting of the O3 air unit to the frame. This frame can also house the Vista/Walksnail system in rear-mounting orientation. (HDZero works in center-mounting orientation with FC or ESC in the rear.) 
  • Aluminum FPV Camera Plates: The new FPV camera mounting solution offers excellent camera protection and support for a range of cameras. The use of a unique interlocking system allows for minimal hardware and strengthens the front end while staying lightweight.

Frequently Asked Questions

WHAT'S THE DIFFERENCE BETWEEN THIS HD READY KIT AND THE ANALOG KIT?

The "HD Ready" kit comes without an FPV system so you can choose your own HD system to add to your build. The analog kit includes the analog FPV video transmitter and camera. 

WHAT IF I CRASH? ARE THERE SPARE PARTS AVAILABLE?

Yes! GetFPV carries all the parts included in this bundle as individual spare parts as well. So fly hard, and have no fear! If you need a replacement part, we've got you covered and plan to support this kit and all the parts for a long time.

IS THIS DRONE KIT GOOD FOR BEGINNERS?

Yes! No matter your skill level, this kit is made for you! We take the guesswork out of picking parts by compiling all the gear together in one easy to assemble kit. This all-inclusive bundle pairs together proven components that are guaranteed to work well together, making the build easy for you.

Not only do you get all the parts, but XILO has partnered with the renowned FPV instructor Joshua Bardwell with a full step-by-step build guide. This build guide takes you from start to finish, building, setup, tuning, flying, radio setup, binding, updating, and more! All you have to do is follow the instructions in the video and you'll be flying your own freestyle FPV drone in no time!

I'M NEW TO FPV AND HAVE NOTHING. DOES THIS KIT HAVE EVERYTHING I NEED TO GET STARTED?

This bundle comes with everything the "drone" itself needs except the radio receiver and FPV System. If you are just getting into FPV and don't have anything yet there are a few key components you will need in addition to this kit to be able to fly. Please check out our "Additional Suggested Parts" list below for suggestions. The good news is most of these parts you can use across multiple drones, so it is an upfront investment, but you won't have to necessarily buy them for every drone you build.

You will need the following in addition to this kit if you don't already have them:

  • FPV Goggles / Video Receiver
  • FPV VTX/Camera System
  • Tools for Building
  • Battery Charger
  • Radio Receiver
  • Flight Batteries
  • Radio

Bundle Specifications

BEGINNER DIY FPV DRONE KIT - QAV-S 2 JOSHUA BARDWELL SE 5" -  HD READY

DJI GOGGLES 2 + BATTERY

  • Supported Video and Audio Playback Formats: MP4 and MOV (video coding formats: H.264 and H.265; audio format: ACC, PCM)
  • Wi-Fi Transmission Power (EIRP)
    • 2.4 GHz: < 20 dBm (FCC/CE/SRRC/KC)
    • 5.1 GHz [8]: < 20 dBm (FCC/CE/KC)
    • 5.8 GHz [4]: < 20 dBm (FCC/SRRC/KC), < 14 dBm (CE)
  • Transmission Power (EIRP):
    • 2.4 GHz: < 30 dBm (FCC), < 20 dBm (CE/SRRC/KC)
    • 5.8 GHz: < 30 dBm (FCC), < 23 dBm (SRRC), < 14 dBm (CE/KC)
  • Operating Temperature Range: -10° to 40° C (14° to 104° F)
  • Bluetooth Communication Frequency: 2.400-2.4835 GHz
  • Wi-Fi Wireless Streaming: Supports DLNA Protocol
  • Bluetooth Transmission Power (EIRP): < 8 dBm
  • Supported SD Cards: microSD (up to 256 GB)
  • Max Video Transmission Bitrate: 50 Mbps
  • Wi-Fi Communication Frequency:
    • 2.400-2.4835 GHz
    • 5.150-5.250 GHz (indoor use only)
    • 5.725-5.850 GHz
  • Wi-Fi Protocol: Wi-Fi 802.11b/a/g/n/a
  • Power Input: DJI Goggles 2 Battery
  • Bluetooth Protocol: Bluetooth 5.2
  • Video Recording Format: MOV
  • Communication Frequency
    • 2.400-2.4835 GHz
    • 5.725-5.850 GHz
  • FOV (single screen): 51

DJI O3 AIR UNIT + CAMERA + ANTENNA

  • Live View Quality and End-to-End Latency:
  • With DJI FPV Goggles V2: 
    • 810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
    • 810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
  • With DJI Goggles 2: 
    • 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
    • 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms."
  • Supported Flight Controller Firmware: Compatible with flight controller firmware that supports Betaflight. For more information, check the product FAQ.
  • Channels:
    • Supports auto mode
    • Supports manual mode: 40 MHz: 1 channel; 20 MHz: 3 channels; 10 MHz: 3 channels
  • Max Video Transmission Range: 10 km (FCC), 2 km (CE), 6 km (SRRC)
  • Supported DJI Goggles: DJI Goggles 2 and DJI FPV Goggles V2
  • Supported DJI Remote Controller: DJI FPV Remote Controller 2
  • Recommended microSD Cards:
    • SanDisk Extreme U3 V30 A1 32GB microSDXC
    • SanDisk Extreme Pro U3 V30 A1 32GB microSDXC
    • Kingston Canvas Go!Plus U3 V30 A2 64GB microSDXC
    • Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
    • Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
    • Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
    • Samsung PRO Plus U3 V30 A2 256GB microSDXC"
  •  Weight:
    • Air Unit (camera module excluded): Approx. 28 g
    • Air Unit (camera module included): Approx. 36.4 g
    • Antenna: Approx. 3 g
  • Operating Temperature: -10º to 40º C (14° to 104° F)
  • Dimensions:
    • Transmission Module: 32.5×30.5×14.5 mm
    • Camera Module: 21.2×20×19.5 mm
    • Coaxial Cable: 115 mm 
    • 3-in-1 Cable: 100 mm 
    • Antenna: 85 mm
  • Supported SD Cards: microSD (up to 256 GB)
  • Communication Frequency:
    • 2.400-2.4835 GHz (RX only)
    • 5.725-5.850 GHz (RX and TX)
  • Channels Info:
    • FCC/SRRC/CE: 
      • 40 MHz:
    • Channel 1: 5794.5 MHz
      • 20 MHz/10 MHz: 
    • Channel 1: 5768.5 MHz
    • Channel 2: 5804.5 MHz
    • Channel 3: 5839.5 MHz
  • Transmission Power (EIRP):
    • FCC: < 33 dBm
    • CE: < 14 dBm
    • SRRC: < 30 dBm
  • Input Voltage: 7.4-26.4 V
  • Cable: 3-in-1 100mm

IMPORTANT NOTES

  • Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

Recommended (Not Included)

LIPO BATTERY

BATTERY CHARGER

PROPELLERS

HD ACTION CAMERA

RADIO

RADIO RECEIVER

RADIO TRANSMITTER

SOLDERING AND TOOLS

ACCESSORIES

Links

BUILD GUIDE VIDEOS

Are you seeking a step-by-step guide to building the QAV-S 2 HD Ready Kit? Follow the link for the entire build guide series, straight from the acclaimed FPV Pilot himself... Joshua Bardwell!

QAV-S 2 FRAME KIT

Compatibility Chart

Featured Videos

VIDEO: QAV-S 2 IS HERE!

 

VIDEO: Nobody watches FPV freestyle on YouTube anymore. Do they?

 

More Information

SKU 21670
UPC (GTIN) 723326368646
NDAA Compliant No
Item Returns This item can be returned

Also Purchased

Beginner DIY FPV Drone Bundle - QAV-S 2 Bardwell SE 5” + Fat Shark Dominator HD Goggles + Walksnail Avatar HD Pro

As low as $849.98 Regular Price $1,068.98

Select Options
Beginner DIY FPV Drone Kit - QAV-S 2 Joshua Bardwell SE 5” - HD Ready
$299.99
Back Ordered
NEW
DJI Goggles 2
Special Price $449.00 Regular Price $648.99
Back Ordered
SALE
DJI O3 Air Unit
Special Price $179.00 Regular Price $229.00
SALE