The Flywoo GOKU Versatile F405 2S 12A AIO - No RX (ICM42688) takes integration to the next level, bringing essential drone components to a singular, well-organized board. Part of the esteemed GOKU Versatile series, this circuit board is designed for seamless assembly and performance, reducing the pilot's need for external additions.

Note: (Insert any product options here in black text with options in bold.)

Example: "Choose from two KV's: 1800KV (4S) or 2500KV (6S)."

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in bold.)

• Features a 2S 12A ESC and OSD for streamlined flight performance.
• Provides 6 open serial ports and I2C functionality, enhancing connectivity options.
• Inclusions of Blackbox, Barometer, and CURR cater to a comprehensive flight experience.
• Empowered by the robust F405 BGA MCU for reliable performance.
• Comes with 2 integrated WS2812 LEDs for visibility and aesthetics.
• Designed with a logical layout, facilitating an easier build process.
• Capable of working with various RX simultaneously.
• Fitted with MPU6000 and ICM42688 Gyroscopes for enhanced stability.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

F405 FLIGHT CONTROLLER

• Size: 30*30mm
• Weight: 4.1g
• Hole: 25.5*25.5-3mm
• MCU: STM32F405
• UARTS: 1,2,3,4,5,6
• Motor: M1-M4 OUTPUT I2C: SCL/SDA
• Gyro: ICM42688 \ MPU6000
• Barometer: BMP280
• LED:2*WS2812
• Flash: 8M
• BEC: 5V 2A
• Firmware: FLYWOOF405S_AIO

ONBOARD 4in1 ESC

• Built-in 1S/2S 12A BL_S 4in1 ESC
• Support: Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
• Input Voltage: 1-2S Lipo
• Firmware: BLHELI_S
• Firmware: Z_H_30_REV16.7

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won't need to set up another receiver. If you don't have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x Flywoo GOKU Versatile AIO - F405 FC + 12A 2S ESC (ICM42688) - No RX

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS