Welcome to GetFPV My Account My Wishlist Log In

Flycolor X-Tower F7 60A 3-6S BLHeli32 Freestyle Stack w/ Bluetooth, LED

More Views

Flycolor X-Tower F7 60A 3-6S BLHeli32 Freestyle Stack w/ Bluetooth, LED
The Flycolor X-Tower F7 60A 3-6S BLHeli32 Freestyle is a top-quality flight stack for FPV drones that has both Bluetooth and LED's.
Backorder
$99.99
OR
Description

The Flycolor X-Tower F7 60A 3-6S BLHeli32 Freestyle is a top-quality flight stack for FPV drones that has both Bluetooth and LED's.

Note: To enhance the performance of filtering, users can solder the electrolytic capacitor, which is included in the accessory pack, to the positive and negative terminals.

Features

  • MOSFET with high performance and low Rds, not afraid of large current, more suitable for rapid flight.
  • Two layers tower structure between 4in1 ESC and FC, using cable for quick connection, using silicone vibration absorber for supporting, reducing the effect of vibration on Flight Control.
  • Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
  • The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and Multishot.
  • All Dshot and Proshot signals are supported.
  • Supports SBUS,SPEKTRUM1024/2048 etc. remote control / receiving mode.
  • FC integrated 3.3V,5V, 12V for the receiver, VTX, camera, buzzer, LED, and other peripheral devices.
  • 4-way led port, independent 5V BEC power supply, making the power supply more safe and reliable.
  • Supports Betaflight Configurator to adjust the LED color.

Specifications

  • Item Brand: Flycolor
  • Item Model: X-Tower 2 60A
  • Support Voltage: 3-6S Lipo
  • Con. Current: 60A
  • Burst Current: 70A
  • Structure: Tower
  • F.C Volt: 3.3V/5V/10V
  • MCU of F7: STM32F722
  • F7 Firmware: STM32F7X2 (Config.: FLYCOLORF7)
  • ESC Firmware: Flycolor_X_Cross_BL_32
  • Bluetooth:FC_Bluetooth.
  • USB: Type C
  • Installation Hole: 30.5×30.5mm, M3
  • Size: 41.7×44.8×16.7mm
  • Weight: 26g

ESC

  • MCU:STM32F051 ,ARM 32-bit Cortex MCU, frequency up to 48 MHZ.
  • MOSFET with high performance and low Rds, not afraid of large current, more suitable for rapid flight.
  • ESC firmware: Flycolor_X_Cross_BL_32.
  • Two layers tower structure between 4in1 ESC and FC, using cable for quick connection, using silicone vibration absorber for supporting, reducing the effect of vibration on Flight Control.
  • Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
  • The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and Multishot.
  • All Dshot and Proshot signals are supported.

FC

  • FC firmware: STM32F7X2(Config.:FLYCOLORF7)
  • FC board:FLYCOLORF7.
  • MCU:STM32F722.
  • Gyro:MPU-6000 SPI.
  • Bluetooth:FC_Bluetooth.
  • USB: Type C.
  • Supports SBUS,SPEKTRUM1024/2048 etc. remote control / receiving mode.
  • FC integrated 3.3V,5V, 12V for receiver, VTX, camera, buzzer, LED and other peripheral devices.
  • 4-way led port, independent 5V BEC power supply, making the power supply more safe and reliable.
  • Supports Betaflight Configurator to adjust the LED color.
  • Install holes:30.5x30.5mm,M3.

Includes

  • 1 x 32Bit 4in1 ESC 
  • 1 x F7 Flight Control 
  • 8 x Silicone vibration absorber 
  • 4 x LED wire 
  • 4 x Assemble screw M3×22 
  • 5 x O-Ring x
  • 1 x ESC /FC connecting wire (2x10p SH1.0) 
  • 1 x Power wire(XT60) 
  • 1 x Electrolytic capacitor 
Additional Information
SKU 15238
Manufacturer FlyColor
UPC (GTIN) 789862858973
Reviews