FETtec FC G4 v1.7 Flight Controller

FETtec FC G4 v1.7 Flight Controller

In Stock

Only left for same day shipping. Order now!
Earn
FETtec FC G4 v1.7 Flight Controller
The FETtec FC G4 v1.7 features the latest STM32G4 processor. Providing unparalleled processing power to your aircraft. Along with an IIM-42652 SPI gyro, two 5v BECs, 6-27V (2-6S) power handling, and a host of other features, the G4 from FETtec is on the cutting edge of Flight Controller technology.

About this product

Features:

  • Latest STM32G473 Processor

    • 180Mhz + Math accelerator
    • Gyro IIM-42652 SPI
  • Supply voltage 6-27V (2S-6S Lipo)

  • 2x dedicated onboard BEC (2A each)

    • 5V BEC for RX
    • 5V/16V BEC for VTX (switchable and real Pit*)
  • Improved IO protection

    • All IOs of the microcontroller e.g. in connectors or solder pads are protected against voltage or current spikes

  • 2x 8 pin connector for solder free ESC connection

    • Connector 1: ESC signal 1-4, telemetry, VCC, GND
    • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

    • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 6 pin connectors for serials

    • RX1, TX1, 3.3V, VCC, 5V, GND
    • RX3, VCS/TX3, RGB LED, VCC, 5V, GND
  • 1x 4 pin connector for receiver

    • Signal, TLM, 5V, GND

  • 5 UART serials

    • UART 1 free
    • UART 2 used for Receiver
    • UART 3 free
    • UART 4 used for onboard OSD, can be set free
    • UART 5 used for ESCs / TLM / Onewire
  • 4 ESC solder pads (Signal/GND) in each corner

  • Buzzer pads

  • 4 tiny RGB LEDs (selectable color)

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec Alpha FC firmware (KISS FC firmware flashable)

  • Updated onboard OSD

    • Graphic OSD (STM32)
    • Full KISS Tuning
    • Filter (PIDs, Rates, Settings)
    • LED control (RGB LED, Racewire)
    • VTX
    • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
    • KISS GPS support + live map
    • Custom graphic pilot logo
    • Stick overlay
    • Custom layout
    • can be deactivated for usage of digital systems
  • Connector type: JST-SH-1mm

 

*real Pit-Mode: A power supply pin which is remotely switchable

 

Dimensions:

dimensionsO2BNL0T723GCJ

  • Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm

  • Mounting hole arrangement:

    • 20 x 20mm with M2 mounting hole (expandable to M3)
    • 30 x 30mm with M3 mounting hole
    • 30 x 30mm mounting hole tips are removable to reduce overall FC size
  • Overall height: 7,9mm

  • Weight: 5,37g

Firmware:

  • FETtec Alpha FC firmware (KISS FC firmware flashable)

  • FETtec OSD Firmware

Scope of delivery:

  • 1x FETtec FC G4 v1.7
  • 1x 8 pin cable (open on one side)
  • 1x 6 pin cable (open on one side)
  • 1x 4 pin calbe (open on one side)
Available downloads:
 

More Information

SKU 17236
UPC (GTIN) 764613336795
Manufacturer FETtec
Mounting Pattern Convertible 20x20/30.5x30.5
NDAA Compliant No
Item Returns This item can be returned

Also Purchased

FETtec Spike Absorber
$7.99
Back Ordered
FETtec 45A 3-6S 4-in-1 ESC - 30x30
$89.99
Back Ordered
Lumenier Razor LED 55A 4-in-1 F3 BLHeli_32 2-6s ESC
Special Price $61.99 Regular Price $74.99
SALE