The SkyStars Fly Tower Stack features an F722 HD Pro2 Flight Controller and a Kramam KM50 Pro 50A 3-6S 4-in-1 BLHeli_32 ESC with a 30x30  mounting pattern.

Features

• High efficiency heatsink (low specific heat capacity) for better cooling
• PCB uses 3 oz copper which reduces heat and increases system efficiency
• Rubber vibration isolation to prevent cracking in the event of a fall
• Supports telemetry functions (voltage, RPMS and current)
• Flashed with the latest Blheli_32 firmware
• Panasonic ZLH Ultra Low ESR Capacitor
• Supports custom ESC startup sounds
• Large motor pads for easy soldering
• Using aluminum alloy for heatsink
• F722 HD Pro2 Flight Controller
• Built-in overcurrent protection
• KM50 Pro 50A ESC

Specifications

KM50 PRO 50A ESC

• Mounting Hole Pattern : 30.5mm / M3
• Input voltage : 3-6S LiPo / LiHV
• ESC Protocol : Dshot 600/1200
• Product size : 41x46x7.6mm
• Overcurrent Protection : Yes
• Peak Current : 60A (10S)
• Continous Current : 50A
• Firmware : Blheli_32
• Weight : 17g
• BEC : NO

F722 HD PRO2 FC

• Receiver: Support Sbus, crsf, ibus, Spektrum 1024/2048, SBUS, XBUS, SumD and SumH RX. Built-in inverter, support 3.3v spectrum satellite receiver, support PPM receiver. The default receiver input is UART 1, the F7 has a built in inverter that can be used in any free UART.
• LED: 4 independent LED pads, support WS2812 programming
• Mounting Holes: Standard 30.5mm square to center of holes
• Item name: F722HD Pro 2 Betaflight Flight Controller
• OSD: Betaflight OSD & DJI HD OSD (UART6)
• Input Voltage: 3-6S LiPo(11.1V~22.2V)
• 6 Hardware UARTS (UART123456)
• MCU: STM32F722RGT6 216MHz
• Firmware: SKYSTARS F7HD
• Dimensions: 38.5x40x6.2mm
• USB connection: USB-C
• IMU: MPU6000 (SPI)
• BEC 5V 3A & 10V 3A
• Buzzer Pad: YES
• Black box: 16MB
• CURR pad: YES
• RSSI Pad: YES
• Weight: 6.8g

Includes

• 1x SkyStars Fly Tower Stack - F722 HD Pro2 FC + KM50 Pro 50A 3-6S 4-in-1 BLHeli_32 ESC - 30x30
• 1x Connecting Cable
• 1x XT60 Connector
• 1x Capacitor