HEX Here3+ CAN GNSS GPS Module w/ iStand

HEX Here3+ CAN GNSS GPS Module w/ iStand

In Stock

Only left for same day shipping. Order now!
Earn
HEX Here3+ CAN GNSS GPS Module w/ iStand
The Hex Here3+ GPS is a cost-efficient GNSS system that supports RTK mode with positioning accuracy down to centimeter-level in an ideal environment.

About this product

dummy

The Hex Here3+ GPS is a cost-efficient GNSS system that supports RTK mode with positioning accuracy down to centimeter-level in an ideal environment. The Here3+ features high data rate, upgradeability, noise immunity, and real-time features from the DroneCAN protocol. Here3+ is now moving to DroneCAN 8Mbit bus speed and supports future firmware updates. Here 3 is equipped with the STM32F302 processor, while the Here3+ uses the dual-core STM32H757 running at 400MHz with 2MByte Flash and 1MByte RAM. Built-in IMU (compass, gyroscope, and accelerometer) for advanced navigation needs.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: Diatone Mamba H743 MK4 FC & 128K ESC Unboxing

Features

  • Equipped with STM32H757 high-performance processor in a real-time operating system. The framework developed by Hex provides additional stabilities. Supports future firmware updates.
  • Cost-efficient high precision and RTK-supported GNSS chip (base station needed for RTK). Positioning accuracy down to centimeter-level in an ideal environment.
  • Improved dust and water resistance (Not guaranteed to be water-proof under any situation due to the complexity of the operating environment).
  • Complete built-in set of Inertial Measurement Units (compass, gyroscope, and accelerometer), which satisfy advanced navigation needs.
  • The high data rate, upgradeability, noise immunity, and real-time features benefited from the CAN protocol.
  • Support from ground control software. Future updates will be available from Mission Planner.
  • Brand new design with improved visibility on signal LEDs.
  • iStand Included.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

Specifications

  • Receiver Type: u-blox high precision GNSS modules (M8P-2)
  • Satellite Constellation:GPS L1C/A, GLONASS L1OF, BeiDou B1I
  • Positioning accuracy:3D FIX: 2.5 m / RTK: 0.025 m
  • Processor: STM32H757
  • IMU sensor: ICM42688,RM3100
  • Navigation Update Rate:8 hz
  • Communication Protocol:DroneCAN 8Mbit/s
  • Operating Temperature: -40℃ to 85℃
  • Dimension: 68mmx68mmx16mm
  • Weight: 51.8g

(INSERT FLIGHT CONTROLLER TITLE HERE IN BOLD CAPS)

  •  

(INSERT ESC TITLE HERE IN BOLD CAPS)

  •  

(INSERT VTX TITLE HERE IN BOLD CAPS)

  •  

IMPORTANT NOTES

  • Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

Recommended (Not Included)

Links

  •   (Insert links such as manuals, firmware, etc)

Includes

  • 1x HEX Here3+ CAN GNSS GPS Module
  • 1x Here3+ iStand

Featured Videos

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS

 

More Information

SKU 19922
UPC (GTIN) 724376347360
Manufacturer Hex Technology
NDAA Compliant Yes
Item Returns This item can be returned

Also Purchased

Hex The Cube Orange + Standard Set ADS-B (IMU V8)
$349.99
NDAA
HEX ADS-B Standard Carrier Board
$155.00
NDAA
HEX Here3 CAN GNSS GPS Module w/ iStand
$224.99
NDAA