The GEPRC SPAN F722 HD Bluetooth V2 Flight Controller - 30x30 supports direct plug-in the DJI Air Unit, which can save the trouble of soldering. The upgrade of the type-C USB connector greatly improves the life of the socket and reduces the risk of poor contact.  GEPRC SPAN F722 HD Bluetooth V2 Flight Controller can be well matched with BLheli_32 50A 96K 4-in-1 32-bit ESC. The flight controller supports various receivers, including Sbus, PPM, CRSF, DSMX, iBus, DUMD and other protocols, so don’t worry that the remote controller in your hand cannot be used.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• Bluetooth V2 connectivity
• 30x30 mounting pattern
• DJI Air Unit compatible
• 5V 3A / 12V 3A BEC
• 5 UARTs available
• F722 processor

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Size: 36x36mm, φ4mm hole becomes φ3mm after using silicone grommets
• OSD: BetaFlight OSD w/ AT7456E chip
• Black Box: 512MB onboard SD card
• Firmware: GEPRCF722-BT-HD
• BEC Output: 5V 3A / 12V 3A
• Input Voltage: LiPo 3-6S
• MCU: STM32F722RET6
• USB Connector: Type-C
• Integrated LC filtering
• IMU: 42688-P(SPI)
• UARTS: 5

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Propellers: HQProp 8X5 2-Blade Polycarbonate Propellers (Set of 4) - Light Gray")

•   (Insert links such as manuals, firmware, etc)

• 1x GEPRC SPAN F722 HD Bluetooth V2 Flight Controller - 30x30

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS