Pixhawk 2.1 Cube Black
Pixhawk 2.1 Cube Black
$300.00
Out of Stock
Only left for same day shipping. Order now!

Earn
Pixhawk 2.1 Cube Black
The Pixhawk 2.1 Cube by Hex.
NDAA Compliant Product
About this product
This is the Pixhawk 2.1 Cube only, intended for use as a replacement part and for integration by OEMs. The Cube will not function without a carrier board.
Specifications
- STM32F427 Rev 3 Flight management unit
- STM32F100 I/O processor with pass-through capabilities for failsafe
- 3 IMU's
- 1 Fixed 10 Axis IMU on the main Main board. (MPU9250 3 axis Accell, 3 axis gyro, and 3 axis mag, MS5611 Barometer)
- 2 Vibration Isolated and heat controlled 9DOF IMUs and an isolated Baro. (MPU9250 3 axis Accell, 3 axis gyro, and 3 axis mag, LSM303D 3 axis Accelerometer, 3Axis Magnetometer, L3GD20 3 Axis GyroMS5611 Barometer)
I/O
All connections are via an 80 pin DF17 connector on the base. the following connections are included.
- 2x CAN (pins reserved for a 3rd Can bus on next years model)
- 2x I2C
- 5x Serial (1 reserved for debugging)
- 2x SWD debug ports
- 2x Power input V+I
- 1x Analogue input (one of the power inputs can be used as Analogue if you need)
- Buzzer raw PWM
- Safety switch
- 8 x I/O connected PWM out (Solder option for 3.3 or 5v levels, default 3.3)(opto drive capable 10mA each)
- 6 x Aux FMU connected I/O (PWM or alternate function)
- Servo rail I/O backup power (10.5v Max)
- 2x 5.4v power in pins. All other pins are reserved DNC.
Resources
CubePilot Visual Guide
Made in Taiwan
More Information
SKU | 8185 |
---|---|
UPC (GTIN) | 704817762792 |
Manufacturer | Hex Technology |
NDAA Compliant | Yes |
Item Returns | This item can be returned |