The iFlight BLITZ E80 uses a MOSFET PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. The BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip, supporting up to 100V. The 1-4 layer power board of the PCB circuit is ultra-thick copper with a thickness of 4OZ, ensuring continuous output under high-power operation. The STM32F051 main control processor with a running frequency of up to 48MHz, combined with a three-in-one driver IC, achieves a faster running speed!

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection
• G071 MCU, 48mHz maximum clock speed
• TDK MLCC Low ESR ceramic capacitors
• Top grade PSMN1R0-40YLD MOSFET
• 8 layers double-sided PCB board

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Supports DShot DShot150/300/600/MultiShot/ OneShot etc.
• Constant current：80A，100A（Burst）
• Mounting Holes: 35*35mm/Φ3mm
• Current sensor: Yes, scale 200
• Firmware: IFLIGHT_BLITZ_G2
• Telemetry: Supported
• Weight:65g(±10)
• Volts input: 2-8S
• BEC: No

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

• BLHeliSuite download (BL32)

• 1x iFlight BLITZ E80 Pro G2 80A 4-in-1 BLHeli_32 ESC - 35x35
• 1x 30x30 to 35x35 Mounting Adapter
• 1x Amass XT90E-M Adapter
• 2x UPL 470 50V Capacitors
• 1x XT90 10AWG Connector
• 1x 10AWG Grounding Wire
• 1x iFlight Filter Module V1
• 1x 10AWG Voltage Wire
• 1x FC Connecting Wire
• 1x Hardware Set

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS