The Pixhawk 6C FC combined with the PM02 V3 12S Power Module + M9N GPS brings tons of power to the autopilot and makes it super easy to power and locate the multirotor. 

Pixhawk 6C Flight Controller Module

The Pixhawk® 6C is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connector Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk® 6C, you can find a STMicroelectronics® based STM32H743, paired with sensor technology from Bosch® & InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.

The Pixhawk® 6C's H7 microcontroller contains the Arm® Cortex®-M7 core running up to 480 MHz and has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models. The FMUv6C open standard includes high-performance, low-noise IMUs on board, designed to be cost-effective while having IMU redundancy. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances.

The Pixhawk® 6C is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial applications.

PM02 V3 12S Power Module 

PM02 Power Module is a simple way of providing your autopilot flight controller with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The onboard switching regulator outputs 5.2V and a maximum of 3A from up to a 12S LiPo battery. The Power Module comes completely assembled with XT60 connectors, and wrapped in shrink tubing for protection.

The Power Module is designed to power an autopilot flight controller, an RC receiver, and APM accessories (GPS, radio). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
The GH terminal is also compatible with Pix32, Pixhawk4, Pixhawk4 mini, Pix32v5, and Durandal.

M9N GPS

The M8N GPS has a UBLOX M8N module, IST8310 compass, tri-colored LED indicator, and a safety switch. There are 3 different connector options for different purposes. 
This module ships with a baud rate of 115200 5H.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

Pixhawk 6C Flight Controller Module

• High-performance H7 Processor with clock speed up to 480 MHz
• New cost-effective design with the low-profile form factor
• Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
• Newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
• IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

 PM02 V3-12S Power Module

• UBEC input voltage : 7~51v (2~12s LiPo) 
• Rated current:60A
• Max current:120A(<60S)
• Max current sensing: 120A
• Supports 12S battery
• Voltage and current measurement configured for 3.3V ADC 
• The switching regulator outputs 5.2V and 3A max 
• Weight: 20g

M9N GPS

• Ublox Neo-M9N module
• Industry-leading –167 dBm navigation sensitivity
• Cold starts: 26s
• LNA MAX2659ELT+
• 25 x 25 x 4 mm ceramic patch antenna
• Rechargeable Farah capacitance
• Low noise 3.3V regulator
• Current consumption: less than 150mA @ 5V
• Fix indicator LEDs
• Protective case
• Cable Length: 26cm 
• Diameter 50mm total size, 32 grams with the case.
   

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•  Support Software

• 1 x Pixhawk 6C Flight Controller Module
• 1 x PM02 V3 12S Power Module 
• 1 x Cable Set
• 1 x M9N GPS

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS