The BETAFPV F722 V2 AIO - F722 FC + 35A BLHeli_S 2-6S ESC is very reliable to meet your advanced FPV needs. This board comes with an F722 chip and provides great performance capability and high processing speed, which brings pilots a stable and smooth flight. Featuring a 6-pin plug-n-play port, it can directly connect HD Digital VTX with NO soldering work. With up to 6S input voltage support, this FC pushes the FPV racer to the max. 

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: Diatone Mamba H743 MK4 FC & 128K ESC Unboxing

• The new BLHeli_32 ESC version is built-in a 16MB flash memory chip dedicated to Blackbox logging, which is an extremely powerful tool for tuning and troubleshooting an FPV drone. It has a faster processing speed and up to 128k PWM frequency, providing a more stable and smoother flight for pilots.
• Built-in STM32F722RET6 CPU, F722 FC is more powerful than F4. It features a fast processing speed and stable performance, providing reliable and smooth flight for 4"-5" drones.
• F722 AIO 35A FC has specially added a 6-pin connector for HD Digital VTX, just plug & play, less solder work needed, perfect for the pilots who enjoy the HD Digital VTX system.
• 6 full UARTs are available on this board. With plenty of UARTS, Pilots could have more options for external parts like VTX, GPS, Receiver, and other components.
• It can handle 35A continuous current (40A burst), supports the 2-6S lipo battery, and gives the drone a more robust flight performance.
• With the 6S battery and this F722 35A AIO FC, the drone will break through the limit of the power of the toothpick drone, exploring more possibilities in 4-5'' drones.
  
  

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Board Thickness: 1.6mm
• Blackbox: 16MB
• Weight: 9.00g

FLIGHT CONTROLLER

• OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
• Blackbox: 16MB (V2 with BLHeli_32 ESC included)
• Firmware version: betaflight_4.3.0_STM32F7X2
• Item: F722 35A AIO Brushless Flight Controller
• Weight: 7.06g(BLHeli_S) / 9.00g (BLHeli_32)
• Support programmable LED like WS2812 etc
• Mounting hole size: 26mm*26mm
• CPU: STM32F722RET6
• Built-in current sensor
• Six-Axis: ICM42688

ESC

• Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)
• ESC firmware: BLUEJAY G_H_30_48_v0.16 (BLHeli_S) / BETAFPV_35A_V2_BLHeli_32_Multi_32_9 (BLHeli_32)
• Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
• Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series
• Indicators: Power indicator (Red) / FC indicator (Blue)
• Connector: 80mm 14AWG silicone cable with XT60
• Capacitance: CS|5*10*13mm|470μF|35V
• ESC Firmware: BLHeli_32.9, 32-bit
• PWM Frequency: 24k-128k
• Input voltage: 2S-6S Lipo
• Continuous current: 35A
• Peak current: 40A

(INSERT ESC TITLE HERE IN BOLD CAPS)

(INSERT VTX TITLE HERE IN BOLD CAPS)

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

• Download the FC firmware and CLI dump file for F722 ICM42688 Gyro (V2 BLHeli_32).

• 1x BETAFPV F722 V2 AIO - F722 FC + 35A BLHeli_S 2-6S ESC
• 1x 6-Pin Connector for HD Digital VTX
• 1x Cable Pigtail (XT60)
• 4x M2x10mm Screws
• 1x Capacitance
• 8x M2 Nuts 

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS