The Zeez Design 2020 45A 3-6S BlHeli32 4-in-1 ESC supports up to 6S and it features STM32L4 MCU, supports BlHeli32 firmware, Dshot150, Dhsot300, Dshot600, ProShot 1000, and is compatible with all older analog protocol (OneShot42, OneShot125, Multishot). Also supports ESC telemetry and Bi-Directional DSHOT protocol for RPM filtering out of the box.

Note: Make sure to solder the aluminum low ESR capacitor in the holes in the battery pads

Specifications

• Mounting Holes 20×20
• 3S to 6S input
• Constant Current: 45A
• Peak Current: 55A
• STM32L4 MCU (ARM Cortex M4, 80MHz frequency)
• BlHeli32 Firmware (support Dshot150/ Dhsot300 /Dshot600/ProShot 1000) and still compatible with all older analog protocol (OneShot42, OneShot125, Multishot)
• 8 Pin JST connector and 8 Pin solder pads
• Holes for Aluminum Low ESR capacitor (included 35V 470uF Low ESR capacitor and a spare capacitor)
• Onboard analog current sensor (Betaflight Scale: 200)
• ESC telemetry to read RPM and ESC temperature
• Compatible with Bidirectional Dshot out of the box

Includes

• 1 x Zeez ESC 4in1 45A 2020
• 4 x Aluminum Standoff
• 1 x ESC to Flight Controller 8 Pin to Servo Connector JST SH 1.00mm connector
• 2 x 470uF 35V Low ESR Capacitor
• 1 x XT60 with 14AWG Silicon Cable for battery connection
• 2 x Spare M3 rubber anti-vibration for Flight Controller or ESC