The iFlight Blitz E80 80A 2-8S BLHeli_32 Single ESC was designed to give your motors smooth power with great stability and durability. The 32bit 48mHz G071 MCU and 11 pieces TDK MLCC total 240UF Low ESR capacitors bring faster-responding speed and a smoother flying experience.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• Rational layout: large soldering pad, countersinks, and semicircle orifices enable each layer to be energized after power-on.
• 80A 8 layers 4OZ copper PCB, better operating load capacity
• 11 pcs TDK MLCC 420uF low ESR capacitors, lower ripple and more stable
• Stable and reliable MOSFET
• 3528 LED for power- on display
• Telemetry output
• Current Sensor
• Brake on Stop
• Motor Timing

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Supports: DShot DShot150/300/600/MultiShot/OneShot PWM Drive
• STM32G071 MCU, 48Mhz Runs BLHELI 32.X Firmware
• Capacitance: total 240UF Low ESR
• Target: IFLIGHT_BLITZ_G2
• Supports 2-8S lipo input
• Dimension: 40*17*10mm
• Weight: 9.5g(±2g)
• Telemetry: Supported
• Firmware: BLHeli32
• Current Sensor: Yes
• BEC: No

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

• BLHeliSuite download

• 1x iFlight Blitz E80 80A 2-8S BLHeli_32 Single ESC
• 1x Power cables & ESC signal wires
• 1x 50V 470UF capacitor

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS