Unleash the power of your racing drone with the Flycolor Trinx G5 60A 4-in-1 BLHeli_32 ESC - 30x30. Featuring an aluminum heat sink with a large surface area, this ESC effectively regulates temperature, ensuring prolonged and superior performance during intense flights. The ARM 32-bit Cortex MCU STM32G071, operating at an impressive 64 MHz frequency, delivers a 25% boost compared to its predecessor, enhancing overall responsiveness. With support for various pulse width inputs, high PWM frequency, and a damping design to minimize vibration effects, the Trinx G5 is tailor-made for aggressive flights and racing drones. The 4-in-1 ESC includes a built-in current sensor and VBAT output, providing comprehensive data for optimal control. Weighing only 19.6g with the heat sink, and compact at 45x41x8.3mm, it's an ideal choice for your high-performance FPV drone and cinematography needs.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• The aluminum heat sink, with a large surface area of aluminum heat sink, can effectively slow down the temperature rise, hence giving longer and better performance when pushing your quad.
• ARM 32-bit Cortex MCU STM32G071, with a frequency up to 64 MHZ, where that's 25% higher than the previous generation of MCU.
• Supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and Multshot.
• PWM frequency up to 128K, high frequency for higher throttle makes running smoother.
• Damping design, hence reducing the effect of vibration on the flight controller.
• Supports higher power load, more suitable for violent flight or racing drone.
• Multiple Protocols, where all Dshot and Proshot signals are supported
• 4in1 ESC built-in current sensor and VBAT output.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Mounting holes: 30.5x30.5mm (M3)
• ESC Programming: BLHeliSuite32
• Throttle Calibration: Supported
• Weight: 19.6g (with heat sink)
• Firmware: Flycolor_Raptor_5
• Dimensions: 45x41x8.3mm
• Application: 170-450 Multi
• LiPo Power input: 3-6S
• Burst Current: 55(10s)
• MCU: STM32G071
• Cont.Current: 45A
• BEC: No

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x Flycolor Trinx G5 60A 4-in-1 BLHeli_32 ESC - 30x30

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS