The NewBeeDrone Infinity AIO V2 is designed to be the board that can last forever. This updated version has optimized hardware and even better weather protection than the V1. This AIO packs in requested features such as OSD Chips and more UART Ports. This workhorse is perfect for those looking for a simple solution and strong protection. A double-sided custom aluminum heatsink gives the board a unique look and provides more efficiency in cooling the board. Since the components are not directly exposed like traditional boards, Infinity AIO has more protection against crashes and splashes. 4 Built-in customizable LEDs and plug-and-play connections with DJI FPV Air Unit provide hassle-free setup. 

Note: This FC works with DJI/Caddx HD Systems only.

Features

• Improved Double-Sided Custom Aluminum Heatsink
• Compatible with DJI/Caddx HD Systems
• OSD Chips and Additional UART Ports
• 4 Built-in customizable LEDs
• Plug-and-Play

Specifications

• 5V 2A Power supply for external LED or GPS module
• UARTs:
• UART1 - SBUS on DJI Connector (RX only)
• UART2 - DJI Connector
• UART3 - Free
• UART7 - Free
• UART8 - Free
• Continuedly Current 55A and 65A Burst ESC
• 10V 3A 30W Design for DJI FPV Air Unit
• 5x37mm with 30.5x30.5 Mounting Holes
• 4x SMT32G071 BLHELI32 ESC MCU
• LED: 4x Betaflight Addressable LED’s
• Betaflight OSD support Analog build
• 6-Pin DJI FPV Air Unit Connector
• Weight: 22gr. without grommets
• I2C_SCL I2C_SDA Ready
• MCU: STM32F745VEH6
• Micro USB Connector
• 3-6S Battery Input
• Blackbox:1MB
• Buzzer Ready
• Gyro: BMI270
• LED Ready

Includes

• 1x NewBeeDrone Infinity AIO V2 Board - Flight Controller + ESC
• 1x Infinity AIO V2 to DJI Air Module Cable 100mm (Silicone)
• 1x Infinity AIO V2 JST0.8 16Pin Cable 150mm (Teflon)
• 4x Grommets Short 4x Grommets Long
• 1x 470uf 35v Electrolytic Capacitor
• 5x Steel Screw M3x14
• 13x Nylon Lock Nut
• 1x XT60 Cable